150cm 28mm County Wood Curtain Pole Set Antique Pine
More Views
150cm - 28mm County Wood Curtain Pole Set Antique Pine
Traditional Wood curtain poles add a wonderful finish to any room.
Your curtain poles are easily but down to size using a hack saw and have a gorgeous finish.
Guide to Pack Content for Curtain Poles
| Size | No of Supports | No of Lined Rings | Finials |
| 120cm | 2 | 12 | 2 |
| 150cm | 2 | 16 | 2 |
| 180cm | 2 | 18 | 2 |
| 200cm | 2 | 20 | 2 |
| 240cm | 3 | 24 | 2 |
| 250cm | 3 | 26 | 2 |
| 300cm | 3 | 30 | 2 |
| 400cm | 3 | 40 | 2 |
This description is a guide, pack size may change over time so we suggest asking to confirm the number of rings in the pack.
If the product is an eyelet pole, the rings will not be included in the pack
If you have any questions about the poles please ask.
| Diameter of Pole | Weight of Curtains to be used |
| 10mm - 19mm | Light / Medium |
| 28mm + | Light / Medium / Heavy |
Somethings to remember when buying curtains poles, 1) As curtain poles do not go flush to the wall you will get light coming round the and above the curtains. Only a small amount, but something to remember if you want a completly black room, tracks may be a better choice. 2) Buy the size bigger than you need as you can cut the down easily with a hack saw. 3) Addiitonal rings are available. Packs contains the recommended amount for a window up to the max size of the pole. If you prefer a fuller look then you may require more rings.
Additional Information
| Operation | N/A |
|---|---|
| Weight Guide | N/A |
| Delivery | No |
Tools Required to Check Measure for Curtains
Piece of paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Tape measure
As this will allow you to get a
rigid full length measurement.
Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.
Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.
Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.
