Matching Throws or Runners Unlined
Currently 3-4 Weeks. Made to Order. Manufacture time may increase. Order Soon to Avoid Disappointment
If you have purchased a set of curtains or any of our other made to measure products, we can manufacture matching throws or runners to complete the look of your space.
You must buy the curtains and bedding together due to print runs on patterns or if not we can offer a stand-alone service. The minimum order quantity is 5 for this. Please get in contact with our team for a custom quote.
Our bed runners and throws are made to cover standard size beds.
If the fabric is not specified by contacting us when ordering we will manufacture from same material as your curtains.
General Sizes are as follows:
Single Bed Runner Lined 137-150cm x 65cm
Single Bed Throwover Lined 137-150cm x 210cm
Double Bed Runner Lined 200cm x 65cm
Double Bed Throwover Lined 180cm x 210cm
Kind Bed Runner Lined 225cm x 65cm
King Bed Throwover Lined 245cm x 210cm
Throws and runners will all be ivory polyester lined.
PLEASE NOTE THESE PRODUCTS ARE NOT QUILTED
|Flame Retardant Certified Rating||No|
|Delivery||Currently 3-4 Weeks. Made to Order. Manufacture time may increase. Order Soon to Avoid Disappointment|
|Fabric Style||Plains, Semi Plains|
|Pattern Repeat Vertical (cm)||No|
|Fabric Width (cm)||No|
Piece of paper
For recording your
Someone to assist if your
windows are large .
As this will allow you to get a
rigid full length measurement.
The first step is to decide whether you want your curtains to hang from, whether you go for a curtain track or a curtain pole, both of which should be positioned 15cm (6 inches) above the window and extend 15-20cm (6-8 inches) either side.
You want to measure the total width of the track or pole, excluding the finials as these will not be covered. Then add a small amount on to allow for an overlap of your curtains.
When you are ready to measure, you have to make a decision about where you want the curtains to finish. The choices are whether to go to the sill, below the sill or to the floor. We suggest that:
- Sill length curtains finish 1.25cm (1/2 inch) above the sill.
- Curtains that fall below the sill should finish 15cm (6 inches) below or just above the radiator to stop heat loss.
- Floor length curtains finish 1 - 1.5cm (1/2 inch) from the floor (although you can create a shappy sheak look by having them puddled on the floor, but that is personal preference).
It is essential that you double and triple check your measurements as if you have measured incorrectly your curtains will not fit properly and if they are made to measure / custom drapes they cannot be changed.
Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.
Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.
Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.
Flame Retardant to British Standards
This fabric is flame retardant to British Standards. The flame retardant standards are certified for use in commercial environments, including; care homes, hotels, schools, pubs, restaurants and more. All our fire resistant products come with certification from UK registered testing houses. Please check the additional information tab for the flame retardant standards this particular product complies to. We ensure all our stated fire resistant curtain fabrics are certified to BS5867 Part2B or 2C. Upholsteryfabrics are certified to BS5852 and the bedding to BS7175, but please check the additional information to ensure the fabric you are viewing is fit for the purpose you require.
Free Product and Fabric Samples
We offer a full range of free fabric samples for all of our clients. Simply click the "order free sample" button above and select the options you would be interested in and you will get a samples added to your "shopping cart" bag in the menu.
Full Bespoke Quotations & Invoicing Available
We offer a full service for all our products so if you need advice or help please speak with our well trained team. You can speak directly with our sales agent who has over 20 years’ experience in the soft furnishings industry. We are here to help.
We offer clients an invoice which they can pay via bank transfer as well as card over the phone. We try to make the payment process as simple as possible.