Flame Retardant

Bolton Twill 122cm NDFR Wide Flame Retardant

More Views

Excl. Tax: £ 6.23 Incl. Tax: £7.48
Excl. Tax: £ 6.23 Incl. Tax: £7.48

    Quantity Discounts

  • Buy 50 for £5.83 (£7.00 incl. tax) each and save 7%
Excl. Tax: £6.23 Incl. Tax: £7.48
Per Linea Metre
Estimated Delivery

*covid-19 delivery delays Next Day Expected But Not Guaranteed. Delays Possible

UK Mainland £5.99
UK Mainland Over £250 FREE

Black Bolton Twill - Flame Retardent Stage Curtains

Black Bolton twill is an industry staple for stage curtains and drapes. It is very economical yet gives a sense of luxury and standardised in the industry for surrounds and perimeter curtains. This product is ideal for use in schools, village halls, theatres and other commercial environments.

Fabric Specification

  • Width 120cm
  • Weight 245gms
  • Flame retardant to BS5867 Part2B
  • Lining flame retardant to BS5867 Part 2B
  • Retreat if the face fabric is wetted as it is 100% cotton

Reviews

Only registered users can write reviews. Please, log in or register

Additional Information

Washing / Cleaning Information Face Fabric Dry Clean P Sensitive
Flame Retardant Certified Rating BS5867 Part 2B
Delivery *covid-19 delivery delays Next Day Expected But Not Guaranteed. Delays Possible
Flame Retardant Yes
Fabric Style Plains
Fabric Width (cm) 120
Pattern Repeat Vertical (cm) 1
Composition 100% Polyester





Tools Required to Check Measure for Curtains

Piece of paper

For recording your
measurements.




Helper

Someone to assist if your
windows are large .




Tape measure

As this will allow you to get a
rigid full length measurement.








Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.

Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.

We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.

Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.

Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")

These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.

 


how to measure for curtains