Utopia FR Blackout Vertical Blinds Blinds 89mm 36 Colours
7 Day Delivery
Suitable for Commercial Use.
Made to Measure
All Blinds are Made to Measure to your exact requirements.
10 Year Guarentee
Higest Quality Commercial Roller Blinds
Chain Operated Blinds - Smooth Operation
Blackout Office | Flame Retardant | Vertical Blinds
Our Utopia Vertical Blinds in 50 Colours is simple, stylish and easy to operate. These vertical blinds are ideal for offices and contract use. 2 head rail choices for use with a chain or with a wand. The blinds are robust and are of the highest quality. Manufactured in the UK.
- Flame Retardant
- Eco-friendly fabric
- Easy installation
- Bead rope works smoothly
- High quality fabric
- Blackout Fabric Doesn't Let Light Through
- Available in 30 beautiful colours to suit every home style and decor
- Supplied with weights
- Supplied with Stabilising chain.
The vertical blinds can be easily opened and closed and a stacking position is chosen using the control options.
Stacking Position: Left Stack, Right Stack, Split Stack
1. Chain to open and close, with a cord to twist the louves
2. Wand operation where it is pulled along with the twist action on the want to rotate the blinds.
Benefits of the Utopia daylight fabric
To achieve the required level of shading. It's highly efficient shield against the heat for improved temperature control and energy savings.
This daylight fabric also provides more benefits beyond the installation. When cutting this fabric, blades will last longer as the dyed fabric doesnﾒt dull blades as fast as coated fabric, due to the lack of dust created. Also, once cut, a dyed fabric will not have white edges, helping to give a more professional look to any project.
The Utopia Vertical Blind Daylight series is Flame Retardant and available in 50 beautiful colours to ensure a match for any decor.
Further Fabrics Specification
Transmittance is the amount of light and heat transmitted beyond the fabric. The lower the amount, the greater the efficiency. Block/reflect is the amount of heat
and light that is blocked or reflected. The higher the amount, the greater the efficiency.
Absorption is the amount of heat and light absorbed in the fabric. The higher the amount, the lower the efficiency.
Ultraviolet protection illustrates how protective the fabric is against ultraviolet rays. The higher the amount, the greater the effectiveness.
Shading Co-efficiency is tested using a single 6mm glass glazing system with and without a blind to obtain solar heat gain measurements. The heat gained with a blind at the window is divided by the solar heat gained without a blind at the window, giving the Shading Co-Efficient. The lower the result the better the performance of the blind at blocking solar heat.
Head Rail Features of VL30 Vertical Blinds
The VL30 premium profile vertical blind has a 40 x 25mm premium white aluminium head-rail with top-fix brackets and wheeled carrier trucks. The constant transport of the louvres is guaranteed by the precision-made aluminium spindle shaft. It has a metal control chain operation with built in slip clutch to tilt the louvres. Our louvres are available in 2 widths 127mm and 89mm but are supplied at 89mm as standard. IF you want a quote for 127mm please contact the team. All louvres widths are supplied with weights and white stabilising chain.
VL31 Wand Control System
The VL31 premium profile vertical blind has a 40 x 25mm premium white aluminium head-rail with top-fix brackets and wheeled carrier trucks. The constant transport of the louvres is guaranteed by the precision made aluminium spindle shaft. A wand controls the operation and a built in slip clutch assists louvre tilt. Our louvres are supplied in 127mm and 89mm widths with weights and white stabilising chain.
|Flame Retardant Certified Rating||BS5867 Part 2B|
|Delivery||7 Day Delivery|
|Washing / Cleaning Information Face Fabric||Wipe With Damp Sponge|
|Instructions and Brochure||No|
Piece of paper
For recording your
Someone to assist if your
windows are large .
As this will allow you to get a
rigid full length measurement.
The first step is to decide whether you want your curtains to hang from, whether you go for a curtain track or a curtain pole, both of which should be positioned 15cm (6 inches) above the window and extend 15-20cm (6-8 inches) either side.
You want to measure the total width of the track or pole, excluding the finials as these will not be covered. Then add a small amount on to allow for an overlap of your curtains.
When you are ready to measure, you have to make a decision about where you want the curtains to finish. The choices are whether to go to the sill, below the sill or to the floor. We suggest that:
- Sill length curtains finish 1.25cm (1/2 inch) above the sill.
- Curtains that fall below the sill should finish 15cm (6 inches) below or just above the radiator to stop heat loss.
- Floor length curtains finish 1 - 1.5cm (1/2 inch) from the floor (although you can create a shappy sheak look by having them puddled on the floor, but that is personal preference).
It is essential that you double and triple check your measurements as if you have measured incorrectly your curtains will not fit properly and if they are made to measure / custom drapes they cannot be changed.
Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.
Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.
Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.