35mm End Caps for Curtains Poles 3 Colours
Flame Retardant
Made To Measure
35mm End Caps for Curtains Poles 3 Colours
Flame Retardant
Made To Measure
3 - 5 Working Days Delivery
UK Mainland Over £250
FREE
A Pair of 35mm End Caps: Curtain Pole End Finish for Contract Installations
A simple finishing component supplied as a pair, designed to close and tidy the ends of a 35mm curtain pole. Suitable for replacements, refurbishments, and new installations where a clean edge detail is required.
Pair Supplied
Two end caps per order
35mm Pole Size
For 35mm diameter curtain poles
Neat End Detail
Covers the open pole end
Maintenance Ready
Useful for repairs and refits
Contract Fit-Out
A practical pole accessory
Spec-Led
Check the spec tab for details
Expectation setting: This is a curtain pole component (not a curtain, fabric, or track). Confirm the pole diameter and end-cap style match your existing installation before ordering.
Overview: a practical finishing detail for 35mm curtain poles
These 35mm end caps are supplied as a pair to provide a clean finish at the ends of a compatible 35mm curtain pole. They help complete the installation detail and are commonly held as spares for maintenance call-outs.
Best suited for: replacement parts, refurbishments, and new installs where you need a simple end finish to close the pole end. For specification-critical work, confirm the exact pole size and fitting type before ordering.
Any fitting guidance and supporting documentation (where available) is provided in the specification tab. If certificates apply to this item, they will also be listed there.
Where this fits in our range
This is a finishing accessory used with curtain pole hardware. Choose it when you need to replace missing end caps or complete the end detail on a 35mm curtain pole. For other pole diameters or different end finishes, select the relevant alternative component.
Who uses 35mm curtain pole end caps
Typically ordered by installers, maintenance teams, and specifiers managing contract interiors where pole hardware is maintained over time. Used on refurbishments and reactive maintenance when end finishes are missing or damaged.
Also useful for site spares: keeping a small stock can reduce downtime during room turns, repairs, or scheduled refits.
Best suited for
- Replacing missing or damaged end caps on compatible 35mm curtain poles
- Completing end finishes on new installs where the pole end is exposed
- Maintenance stock for contract sites and ongoing service work
Technical specifications
| Product | Curtain pole end caps (pair) |
| Compatible pole size | 35mm diameter curtain pole |
| Quantity supplied | 2 end caps |
| Notes | Confirm fit and fixing method against your existing pole system. Any fitting guidance or documentation (where available) is provided in the specification tab. |
Any fitting notes and supporting information is provided in the specification tab. If certificates apply to this item, they will be listed there.
| Delivery | 3 - 5 Working Days Delivery |
|---|
How to Install Curtain Rails & Blinds into Plaster Board
How to Dress 3" Pencil Pleat Curtains
How to install Metal Curtain Poles
How do I calculate how much curtain fabric I need?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc