10.5 Tog Single Duvet - Flame Retardant Source 5
Flame Retardant
Washable
Medium Weight
10.5 Tog Single Duvet - Flame Retardant Source 5
Flame Retardant
Washable
Medium Weight
- Buy 5 for £46.78 each and save 5%
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEFlame Retardant Duvet (Source 5): BS7175 Compliant Hollow Fibre Quilt
A contract-suitable flame retardant duvet manufactured to comply with BS7175 Source 5. Made with a 100% polyester hollow fibre inner and a fire retardant cotton cover, designed for spec-led environments where Source 5 is typically required.
BS7175 Source 5
Manufactured to comply
Hollow Fibre Fill
100% polyester inner
Wash Care
Machine washable (see specs)
Tog Rating
10.5 tog quilt
Single Size
135 x 200cm
Spec-led Supply
Confirm required source level
Expectation setting: This duvet is supplied to a Source 5 specification. Source requirements vary by site and risk assessment (including specialist environments). Always confirm the required level with the responsible officer before ordering.
Overview of the Source 5 flame retardant duvet
These flame retardant duvets are produced to comply with the BS7175 British Standard at Source 5. They are constructed with tight stitching and a 100% polyester hollow fibre inner.
The duvet uses a fire retardant cotton cover with a hollow fibre filling. Source 5 is commonly specified for healthcare use, however requirements can differ depending on the environment and risk profile.
Washing instructions and any supporting documentation are available in the specification tab.
Where this fits in our range
This is our practical Source 5 FR duvet option for spec-driven sites that require BS7175 compliance. If your project requires a different Source level (for example, higher-risk environments), select the Source level that matches the site specification.
Best suited for
- Healthcare settings where Source 5 is specified
- Hotels and serviced accommodation requiring a defined FR duvet specification
- Education and public buildings where BS7175 compliance is required
Who uses a BS7175 Source 5 flame retardant duvet
Suitable for use in hotels, care homes, schools, hospitals and other public environments where a Source 5 duvet is specified.
Source levels can vary by site. In higher-risk environments, a different Source level may be required to meet the local specification.
Specification note
Always check the specified Source level with the responsible officer before purchase. This product is supplied to BS7175 Source 5. Certificates and care details are provided in the specification tab.
Technical specifications
| FR Standard / Test Level | BS7175 Source 5 |
| Product Type | Hollow fibre filled quilt / duvet |
| Filling | 100% polyester hollow fibre |
| Cover | Fire retardant cotton cover |
| Tog Rating | 10.5 tog |
| Care Instructions | Machine washable at 74°C (see specification tab for full care details) |
| Size | Single: 135 x 200cm (54” x 78”) |
For compliance-led projects, please refer to the specification tab for washing guidance and any available certification documentation. Always confirm the required Source level for the site before ordering.
| Washing / Cleaning Information Face Fabric | 71 Degress C |
|---|---|
| Delivery | 3 - 5 Working Days Delivery |
| Flame Retardant | Yes |
Are my products certified for use in a public place?
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
How do I care for and clean flame retardant curtains?
What does FR or flame retardant mean?
Do I get a certificate to show my products are flame retardant?
Customer Product Reviews
Top customer reviews
-
Alana Thomas she was was very fast and…Alana Thomas she was was very fast and good quoting us on time and dispatched it on same day.0 people found this helpful
-
Fast delivery very efficient.Fast delivery very efficient.0 people found this helpful
-
Great service and quality products happy customerGreat service and quality products happy customer0 people found this helpful
-
Very good very quickVery good very quick0 people found this helpful
-
Great products & excellent customer serviceGreat products & excellent customer service, well definitely use again.0 people found this helpful
-
Suitable for a Care HomeBought these for our care home, happy with the price as better than the last lot we bought. Delivered quickly.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc