Flame Retardant Pillow - Source 7 for Prisons
Flame Retardant
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEFlame Retardant Pillow (BS7175 Source 7): Contract Bedding for Care, Hospitality & Secure Settings
A contract-grade flame retardant pillow specified for public and institutional environments. Built to meet BS7175 Source 7, with a flame retardant cover and flame retardant filling as required for Source 7 performance.
BS7175 Source 7
Specified for contract bedding
Contract Use
Care & hospitality settings
Filling Weight
650gm hollow fibre
Size
46cm x 69cm
Cotton Cover
Cover material: cotton
Certification
Certificate available (see specs)
Compliance note: Always confirm the standard required with your site fire officer or responsible person. Certificates and supporting documentation are available in the specifications tab.
Flame retardant pillow for regulated environments
This flame retardant pillow is designed for use in care and hospitality environments where bedding must meet recognised fire safety requirements. It is certified to BS7175 Source 7.
To meet Source 7 requirements, both the outer cover and the filling are flame retardant. The pillow is supplied with a cotton cover and hollow fibre filling, with a stated filling weight of 650gm.
Suitable for standard contract pillow sizing at 46cm x 69cm. For documentation requirements, refer to the specifications tab.
Where this fits in our range
This product sits within our contract bedding range for customers specifying BS7175 Source 7 pillows. If you need a different BS7175 ignition source or a different bedding component (e.g. duvets, mattress protectors), use the specifications tab and select accordingly.
Best suited for
- Care homes and nursing homes
- Hotels, guest houses and serviced accommodation
- Schools and universities
- Public buildings and managed accommodation
- Higher-risk settings where Source 7 is specified (including prisons)
Who uses this BS7175 Source 7 flame retardant pillow
Commonly specified for contract bedding supply into care homes, nursing homes, hotels, schools, and other public or managed environments where pillow fire performance must be evidenced.
For settings with defined compliance schedules and documentation requirements, confirm the site standard with the responsible person before ordering.
Specification support
Certificates are available via the product specifications tab. If you need documentation for tender returns or compliance files, retain the certificate with your project records.
Technical specifications
| Fire Standard | BS7175 - Source 7 Certified |
| Size | 46cm x 69cm |
| Cover | Cotton cover |
| Filling | Hollow fibre filling |
| Filling Weight | 650gm |
Certificates are available in the specifications tab. Always check with your fire officer or responsible person to confirm the required standard for your environment.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Flame Retardant | Yes |
How do I care for and clean flame retardant curtains?
How to Measure for a Recess Fitted Blind
Customer Product Reviews
5.0
100% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
-
Good serviceQuick delivery and good product no complaints at all0 people found this helpful
-
Very quick postage well wrappedVery quick postage well wrapped. Product for someone else but looks good.0 people found this helpful
-
Had just what was looking for with…Had just what was looking for with prompt delivery0 people found this helpful
-
Excellent serviceExcellent service from chat to mailing quote good communication and quick delivery recommend0 people found this helpful
-
Quick and efficientQuick and efficient0 people found this helpful
-
Good qualityGood quality & exactly what I was looking for0 people found this helpful
-
The product I ordered wasn't easy to findThe product I ordered wasn't easy to find and I hadn't dealt with this company before so it was a bit of a risk. However, my order was filled quickly; was just what I ordered and I was kept informed of the arrival date throughout. i would definitely use them again.0 people found this helpful
-
Great service & received quick :)Great service & received quick :) little expensive lol but I needed it to conform to a certain standard0 people found this helpful
-
Very good very quickVery good very quick0 people found this helpful
-
I found everything I needed to satisfy…bedding to be given in to a prisonI found everything I needed to satisfy a prison. I was dealt with by on line chat, they were very helpful and friendly and provided fire certificates needed by the prison. I have passed your website on to other people.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc