Avon FR Daylight Battery Electric Roller Blinds 40 Colours
Flame Retardant
Anti Bacterial
Made To Measure
British Made
5 Year Guarantee
Thermal
Avon FR Daylight Battery Electric Roller Blinds 40 Colours
Flame Retardant
Anti Bacterial
Made To Measure
British Made
5 Year Guarantee
Thermal
3 Weeks or Less
UK Mainland Over £250
FREE
Avon Flame Retardant Daylight Battery Operated Roller Blinds
A made to measure flame retardant roller blind designed for shading, glare reduction and straightforward remote operation. Avon is a daylight fabric, so it allows light into the room while helping manage solar gain and improving comfort in working environments.
Flame Retardant
Suitable for contract environments
Made to Measure
Produced to your required sizes
Battery Operated
Simple remote controlled operation
Light Filtering
Allows light through the fabric
Easy to Clean
Designed to be easy to wipe clean
10 Year Guarantee
Long-term product reassurance
Expectation setting: Avon is a daylight roller blind fabric, not a blackout blind. It filters light and helps reduce glare and heat, but it will still allow daylight into the room.
Why choose Avon flame retardant daylight battery operated roller blinds
Avon is designed for projects that need a practical shading blind with a clean, professional finish and convenient battery powered operation. The blind can be raised or lowered easily to achieve the required level of shading across offices, meeting rooms and other commercial interiors.
The daylight fabric helps soften incoming light while supporting temperature control and solar management. The source material also highlights practical fabrication benefits, including reduced blade wear during cutting compared with coated fabrics and a neater cut edge without a white core.
This range is available in a broad colour selection, making it easier to coordinate with different schemes while keeping to a contract-focused roller blind specification. Washing instructions and any available certificates can be found in the specification tab.
Where this fits in our range
Choose Avon when you want a flame retardant roller blind that provides shading and light transmission rather than full blackout. It sits within our made to measure roller blind range as a daylight option for sites that want easy operation, a tidy finish and a wide choice of colours.
Best suited for
Avon is well suited to office shading, education spaces, healthcare settings and other commercial interiors where a flame retardant daylight blind is preferred over a blackout solution. It is particularly useful where reducing glare and managing solar gain matters, but complete room darkening is not required.
It also suits projects that want the convenience of remote control operation and a made to measure finish for a cleaner installation across multiple windows.
Mechanism and application note
The supplied content references the R20 mechanism as a strong, simple system designed to suit a wide range of blind sizes, with sturdy metal brackets, a metal control chain and features intended to support smooth operation and service life. For project-specific requirements, please refer to the product specification tab and fitting instructions.
Technical specifications
| Product Type | Battery operated made to measure roller blind |
| Fabric Type | Daylight shading fabric |
| Performance | Flame retardant |
| Operation | Remote control operated |
| Manufacture | Made to measure |
| Colour Range | Available in 40 colours |
| Cleaning and Documentation | Cleaning guidance, fitting instructions and any available certificates are provided in the specification tab |
For contract and specification-led projects, please review the specification tab for full technical detail, maintenance guidance and certification information before ordering.
| Composition | 100% Polyester |
|---|---|
| Flame Retardant Certified Rating | BS5867 Part 2B |
| Acoustic Absorption Rating | E Rating |
| Fabric Style | Plains |
| Features | Flame Retardant, Daylight (Shade) |
| Operation | Chain |
| Delivery | 3 Weeks or Less |
| Washing / Cleaning Information Face Fabric | Wipe With Damp Sponge |
| Flame Retardant | Yes |
Are my products certified for use in a public place?
What types of blinds do you offer?
What is the difference between roller blinds and cassette roller blinds?
Are all your blinds flame retardant?
How do I measure for roller blinds?
Do you install blinds or is it DIY only?
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
Can I return made-to-measure curtains?
What does FR or flame retardant mean?
How to Measure for a Recess Fitted Blind
How to Measure for Exact Fit or Outside the Recess Blinds
Do I get a certificate to show my products are flame retardant?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc