Ceiling Suspension Rod Support Kit
3 - 5 Working Days Delivery
UK Mainland Over £250
FREE
Cubicle Curtain Track Suspension Ceiling Support
Ceiling suspension support designed to hang cubicle curtain track installations where a direct, continuous ceiling-fix track is not suitable. Compatible with our cubicle curtain track system.
Track Compatible
Designed to work with our cubicle curtain track
Ceiling Support
Suspends track runs from the ceiling
Length Options
Available from 1m up to 5m
Hardware Component
For track installation support, not a curtain
Connector Size
Two connecting parts measure 38mm each
Spec-Ready
Confirm project requirements in the spec tab
Expectation setting: This is a track suspension support component. It is not a curtain, not a fabric product, and it does not provide blackout or privacy performance.
Overview
Our cubicle curtain track suspension ceiling support is designed to suspend compatible cubicle curtain track runs from the ceiling. It provides an installation option where track support is required below the ceiling line.
Available in lengths from 1m up to 5m. The two parts (113) that connect the rod to the ceiling and track measure 38mm each.
For specification-critical projects, confirm site fixings, load requirements, and installation method before ordering. Any installation guidance and supporting documents are provided in the spec tab where available.
Where this fits in our range
This is a system component used alongside our cubicle curtain track. Choose this suspension support when the track needs to be hung from the ceiling rather than fixed directly to the underside.
Best suited for
- Cubicle track installations requiring ceiling suspension support
- Healthcare environments and treatment areas using cubicle curtains
- Education and changing areas where cubicle curtain tracks are specified
Who uses it
Commonly specified as part of cubicle curtain track installations in healthcare settings, including treatment areas and ward environments. Also used in education and other commercial interiors where cubicle curtain systems are required.
If you need documentation, drawings, or project-specific details, refer to the spec tab for available information.
Technical specifications
| Product Type | Cubicle curtain track suspension ceiling support |
| Compatibility | Compatible with our cubicle curtain track |
| Available Lengths | 1m up to 5m |
| Connector Part Measurement | Two parts (113) measure 38mm each |
Installation requirements, supporting documents, and any available certificates are provided in the spec tab. Confirm site conditions and fixings prior to installation.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Flame Retardant | No |
Customer Product Reviews
Top customer reviews
-
Clinical bed rail partsQuick delivery, very happy.0 people found this helpful
-
Good professional serviceGood professional service. Very friendly and the goods arrived as stated. Would certainly recommend0 people found this helpful
-
Great serviceBespoke products ordered, shipped and received within a few days!0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc