Waterproof Crib 7 Memory Foam Mattress | Care | Prison Single Mattress
Waterproof Crib 7 Memory Foam Mattress | Care | Prison Single Mattress
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREEVMS410 Crib 7 Waterproof Antivandal Memory Foam Mattress
A high specification static mattress designed for prisons, secure units and other high risk environments. Built with a fully welded, zip free antivandal cover and certified to Crib 7 fire standards for secure settings.
Fire performance
Suitable for high hazard secure environments
Antivandal cover
No zips, no openings
Waterproof surface
Fluid resistant and wipe clean
Foam core
Pressure redistribution support
Hygiene focused
Designed for infection control protocols
High risk use
Custody and forensic settings
Important: Mattress suitability must always be determined through site risk assessment and individual clinical review. Fire standards and hazard classifications should be confirmed against your facility requirements before ordering.
Built for secure environments where durability and safety are critical
The VMS410 is engineered for environments where tamper resistance, hygiene control and fire performance are mandatory. The fully welded PVC cover removes access points and helps prevent concealment or deliberate damage.
The wipe clean, waterproof surface supports infection prevention procedures and resists fluid ingress. The material is designed to withstand regular cleaning using appropriate approved solutions.
Internally, the memory foam construction provides pressure redistribution support suitable for longer term occupancy, helping improve comfort compared to basic foam-only constructions.
Where it sits in the range
This is the high hazard, antivandal static mattress option within the range. For lower risk care environments, a zipped medical cover mattress may be more appropriate.
Best suited for
- HM Prisons and custody suites
- Secure psychiatric and forensic units
- Detention and immigration centres
- Police holding facilities
- High risk institutional accommodation
Volume and custom sizing
Standard sizes are available, with custom sizes and specifications available for volume orders. Minimum order quantities may apply depending on size and configuration. Contact the team to discuss project requirements.
Technical specifications
| Fire performance | Crib 7 certified (high hazard secure environments) |
| Cover construction | Fully welded, zip free antivandal PVC cover |
| Cover properties | Waterproof, wipe clean, fluid resistant, anti microbial surface |
| Core | High density memory foam construction |
| Intended environment | Secure, high risk and institutional settings |
Compliance documentation
Fire certification and supporting documentation can be provided upon request for audit and procurement purposes. Always verify site specific compliance requirements before installation.
| Features | Flame Retardant |
|---|---|
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Flame Retardant | No |
Customer Product Reviews
Top customer reviews
-
Bought for a care facilityWe bought this for a care facility where a child would try and light fires, as a precaution we went for a flame retardant mattrtess to reduce worry when they were not being monitored.0 people found this helpful
-
A mustWe had a resident who would refuse to stop smoking so we had to buy a flame retardant mattress. This mattress is excellent quality.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements

Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc