Upholstery Interliner Fabric | Crib 5 Schedule 3 | 152cm Wide
Flame Retardant
Sold Per Metre
Upholstery Interliner Fabric | Crib 5 Schedule 3 | 152cm Wide
Flame Retardant
Sold Per Metre
- Buy 50 for £5.73 each and save 5%
- Buy 100 for £5.43 each and save 10%
- Buy 300 for £5.25 each and save 13%
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEUpholstery Interliner Fabric – Crib 5 Schedule 3 (152cm Wide)
A cotton fire barrier interliner designed for upholstered furniture where compliance with BS5852 Crib 5 and Schedule 3 ignition tests is required. Suitable for contract and domestic upholstery applications.
Crib 5 Compliant
BS5852 Schedule 3
Wide Width
Efficient for upholstery use
Durable Weight
Substantial fire barrier layer
Care
Dry clean P sensitive
Important: This interliner is designed to be used as part of a compliant upholstery build-up. Always ensure your full furniture construction meets current UK fire regulations.
Crib 5 upholstery fire barrier interliner
This cotton upholstery interliner acts as a fire barrier layer within upholstered furniture, helping manufacturers meet Crib 5 Schedule 3 ignition requirements when combined with suitable outer fabrics and fillings.
It allows decorative outer fabrics to be removed for cleaning while maintaining a compliant fire barrier beneath. Suitable for both contract and domestic upholstery where higher fire performance is required.
Direct Fabrics supplies this product in bulk to the upholstery trade, as well as smaller quantities for domestic reupholstery projects.
Typical applications
- Contract seating and sofas
- Hospitality and leisure upholstery
- Education and public sector furniture
- Domestic reupholstery projects requiring Crib 5 compliance
Trade supply
We are a bulk supplier to the upholstery trade and hold stock for fast turnaround. Standard orders are typically dispatched within 1–2 working days (subject to availability).
Technical specifications
| Width | 152cm |
| Weight | 250gsm / 7.4oz sq yd |
| Composition | 100% Cotton |
| Fire Standard | BS5852 Crib 5, Schedule 3 (IMO FTP Code 2010 Part 8 stated in original specification) |
| End Usage | Upholstery fire barrier interliner |
| Average Roll Size | Approximately 50m (rolls may vary) |
Ordering information
Sold per linear metre. Enter the required quantity in metres. For larger volume projects or full roll purchases, contact the team for availability and lead times.
| Composition | 100% Cotton |
|---|---|
| Features | Flame Retardant |
| Delivery | 3 - 5 Working Days Delivery |
| Flame Retardant | Yes |
| Fabric Style | Plains |
| Pattern Repeat Vertical (cm) | na |
| Fabric Width (cm) | 152cm |
What is a printed fabric base cloth?
What does FR or flame retardant mean?
Can I get fabric samples before ordering?
How do I calculate how much curtain fabric I need?
Customer Product Reviews
Top customer reviews
-
Very efficient deliveryVery efficient delivery0 people found this helpful
-
Quick delivery and quality fabricsQuick delivery and quality fabrics with a good choice. The free samples were delivered in a couple of days and the separate order of material was delivered quickly. I am very impressed with customer service.0 people found this helpful
-
Directly-Prompt and FastSuch a prompt service, and a fast delivery, on the second day after placing the order…amazing!0 people found this helpful
-
ImpressedImpressed by the speed of delivery, quality of fabric and easy customer experience! I ordered this on Wednesday morning and woke up Thursday morning to the post man delivering my order! Could not believe the speed of delivery which is fantastic! The fabric is perfect for my needs, came on the roll and packaged really well. I will definitely be returning to Direct Fabrics for future orders, thank you so much!0 people found this helpful
-
Fast delivery. Good prices.Fast delivery. Good prices.0 people found this helpful
-
Excellent productExcellent product despatched quickly and efficiently. Price very competitive. Will continue to use for future purchases0 people found this helpful
-
Excellent ProductExcellent product despatched quickly and efficiently. Price very competitive. Will continue to use for future purchases0 people found this helpful
-
Direct Fabrics were lovely and helpfulDirect Fabrics were lovely and helpful. Everything turned up on time. It was a clear and easy process. Excellent!0 people found this helpful
-
fireproof fabric for cushion linersfireproof fabric for cushion liners. Good quality material and easy to work.0 people found this helpful
-
fireproof fabric for cushion linersfireproof fabric for cushion liners. Good quality material and easy to work.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc