Distinction Textured Voile Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Distinction Textured Voile Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Next Day Expected But Not Guaranteed. (Ex NI, SH, I)
UK Mainland Over £250
FREE
Distinction Flame Retardant Sheer Voile Curtains – Made to Measure (Textured Sharkstooth)
Made to measure flame retardant sheer voile curtains with a sharkstooth-effect texture and refined two-tone character. Designed for daytime privacy and glare control while keeping rooms bright, with a structured drape suited to contract environments.
Flame Retardant
Contract-ready sheer curtain make-up
Sharkstooth Texture
Woven character visible in daylight
Daytime Privacy
Soft glare control, bright rooms
Warp & Weft Colour
Subtle depth across the curtain face
Made to Measure
Made to your sizes and heading choice
Spec Support
Certificates & care details in the spec tab
Expectation setting: These are sheer voile curtains intended for privacy and glare control. They are not blackout and will allow daylight to pass through. Two-tone texture will be more or less visible depending on lighting and gathering.
Made to measure sheer voile curtains for contract interiors
Distinction is specified when a plain sheer is too flat and a patterned voile is unnecessary. The sharkstooth-effect weave and two-tone construction give subtle surface interest while maintaining a clean, neutral curtain face.
Produced as made to measure curtains, allowing you to select sizes and make-up options to suit each window and installation. This supports consistent finish across multi-room and multi-site contract projects.
Flame retardant certification and care guidance are provided within the specification tab for project files and sign-off.
Where this fits in our range
Choose Distinction when you need a contract privacy sheer with visible texture and a slightly more structured drape than entry-level voiles. If a minimal, smooth look is required, a plain voile may be more suitable.
Best suited for privacy sheers in hospitality, healthcare and education
Commonly used for hotel bedrooms and corridors, care environments, student accommodation and public-facing spaces where daylight is required but direct glare and visibility need reducing.
Suitable where consistency of appearance across multiple windows matters, with made to measure production supporting repeatable sizing, fullness and heading choice.
Technical specifications (made to measure curtains)
| Product Type | Made to measure sheer voile curtains |
| Fabric Composition | 100% Trevira CS Polyester |
| Curtain Appearance | Textured sharkstooth weave with two-tone warp & weft character |
| Colours | 5 colours |
| Supply Format | Made to measure (to your sizes and selected curtain make-up) |
| Supporting Documentation | Care instructions and flame retardant certification available in the specification tab |
For contract sign-off, confirm make-up requirements (heading type, fullness, lining requirements if applicable, and any site restrictions) against your project specification. Certificates and care guidance are provided in the spec tab.
| Features | Flame Retardant, Voile |
|---|---|
| Washing / Cleaning Information Face Fabric | 30 Degrees (When Blackout Lined), Dry Clean P Sensitive, Iron Low Heat, Non Tumble Dry |
| Flame Retardant | Yes |
| Delivery | Next Day Expected But Not Guaranteed. (Ex NI, SH, I) |
| Flame Retardant Certified Rating | BS5867 Part 2C |
| Fabric Style | Stripes |
| Fabric Width (cm) | 300 |
| Pattern Repeat Vertical (cm) | 1 |
| Composition | 100% Trevira CS Polyester |
Customer Product Reviews
Top customer reviews
Reviews with images
Images in this review
-
Love my Double Pinch Pleat Voile CurtainsLove my Double Pinch Pleat Voile Curtains
0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc