Marquee Liner Exhibition Fabric Flame Retardant 150cm or 300cm wide
Flame Retardant
Sold Per Metre
Marquee Liner Exhibition Fabric Flame Retardant 150cm or 300cm wide
Flame Retardant
Sold Per Metre
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEFlame Retardant Marquee & Exhibition Drape Fabric (65gsm, 150cm / 300cm)
Our best-selling marquee liner and exhibition drape fabric. A lightweight polyline-style weave designed for stages, event spaces, exhibition stands and marquee linings where clean drape and ease of handling are essential.
Flame Retardant
100% FR polyester
Lightweight
Easy to drape and handle
Width Options
Selected colours available extra wide
Stage & Event Ready
Designed for large scale draping
IFR / DFR Options
Varies by colour & width
Cost Effective
Strong visual impact at low cost
Important: This is a lightweight decorative drape fabric. It is not blackout and does not provide thermal insulation. Always confirm IFR or DFR requirement before ordering, depending on your venue specification.
Lightweight exhibition and marquee lining fabric
This fabric has become a staple within the events and exhibition sector due to its soft handle, easy drape and ability to transform large spaces quickly.
The 65gsm construction allows it to be gathered, swagged and stretched across ceilings, walls and stages without excessive weight. It is straightforward to work with for installers, production teams and venue fit-outs.
Available in selected colours as either IFR (Inherently Flame Retardant) or DFR (Durably Flame Retardant), clearly indicated in the dropdown options.
Where it sits in our range
This is our go-to lightweight decorative event fabric. If you require a heavier stage drape or blackout solution, you should consider a higher weight or blackout fabric.
Suitable applications
- Marquee and event tent linings
- Exhibition stands and shell scheme infill
- Surround drapes and filler drapes
- Lightweight ceiling drapery
- Wall panelling and decorative texture drapes
- Temporary event walling
Why event professionals choose it
It offers strong visual impact with minimal structural load and is simple to transport, handle and install. A practical solution for temporary installations and high-volume event work.
Technical specifications
| Composition | 100% Flame Retardant Polyester |
| Weight | 65gsm |
| Width Options | 150cm or 300cm (selected colours) |
| FR Type | IFR or DFR depending on colour and width (see dropdown options) |
Sold by the metre. Confirm required width and flame retardant type before ordering. For venue-specific compliance, please verify specification requirements in advance.
| Composition | 100% flame retardant polyester |
|---|---|
| Features | Flame Retardant, Voile |
| Delivery | 3 - 5 Working Days Delivery |
| Flame Retardant | Yes |
| Fabric Style | Plains |
| Pattern Repeat Vertical (cm) | 1 |
| Fabric Width (cm) | 150 or 300 |
Are my products certified for use in a public place?
What is a printed fabric base cloth?
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
What does FR or flame retardant mean?
Can I get fabric samples before ordering?
How to Measure for a Recess Fitted Blind
Do I get a certificate to show my products are flame retardant?
Customer Product Reviews
5.0
100% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
-
Direct Fabrics - a delight to do business with!Direct Fabrics have been a lovely company to deal with. Alana provided me with all the information i needed prior to purchasing and processed my order for me which was a really nice experience compared to just ordering via a website. Delivery was very speedy. I’ll be sure to send some pictures of our barn after our wedding, where the fabric is being used to dress it up. Many thanks for the fantastic service!0 people found this helpful
-
Lovely Fabriclovely fabric, came well wrapped and quickly. would buy again. Great price.0 people found this helpful
-
Great service. Highly recommendGreat service. Highly recommend0 people found this helpful
-
Highly recommendExcellent company to deal with. Sales team were extremely helpful over the phone and email to ensure I received the correct fabric. Would highly recommend0 people found this helpful
-
I ordered fabric samples for a stage backdrop project that I was researchingI ordered fabric samples for a stage backdrop project that I was researching. Despite the current Covid restrictions which seems to be an all too common excuse for service delays the samples arrive promptly. I also received a follow-up call to check. Great service. Thanks.0 people found this helpful
-
Excellent servicesExcellent services. Lizzie was lovely to deal with. I would definitely buy from direct fabric again.0 people found this helpful
-
Fast and efficient serviceFast and efficient service. Staff were very helpful when I had the opportunity to speak with them.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc