Fineline Connector white
7 Working Day Delivery
UK Mainland Over £250
FREEFineline Connector – White (Fineline Curtain Track Joining Bar)
The Fineline Connector – White is a joining bar used to connect two sections of Fineline curtain track. It provides a secure, aligned join to maintain track continuity and support smooth curtain travel across the connection.
Fineline Compatible
For Fineline track sections
Secure Join
Maintains alignment at the join
Smooth Travel
Helps curtains pass the joint cleanly
Straightforward Fit
Designed for track section joining
Essential Component
For multi-piece track builds
White Finish
Matches white Fineline systems
Expectation setting: This item is a track connector (joining bar) used to join two Fineline curtain track sections. It is not a curtain track, bracket, runner, or end stop.
Overview
Use the Fineline Connector – White to join two pieces of Fineline curtain track into one continuous run. The connector supports a clean, stable join so the track remains consistent in strength and function across the joined sections.
This accessory is intended for Fineline track applications where tracks are supplied in sections or where site constraints require a multi-piece installation.
Compatibility is exclusive to the Fineline curtain track. Refer to the specification tab for product and system details.
Where this fits in our range
This is a system component for Fineline curtain tracks. Choose it when a Fineline track run needs joining between two track lengths. For other track systems, select the connector specified for that rail profile.
Best suited for
- Joining two Fineline track lengths into one run
- Installations where tracks are supplied in sections
- Contract maintenance where like-for-like Fineline components are required
Who uses the Fineline Connector – White
Used by contract installers, facilities teams and fit-out contractors when assembling Fineline curtain tracks on site, particularly where long runs are installed in multiple sections.
Suitable for maintenance replacements where the existing installation uses the Fineline system and continuity of components is required.
Compatibility note
This connector is compatible exclusively with the Fineline curtain track.
Technical specifications
| Product | Fineline Connector – White |
| Use | Joins two Fineline curtain track sections |
| Compatibility | Fineline curtain track only |
| Documents | Washing instructions and certificates (where applicable) are available in the specification tab |
For contract projects, confirm the full Fineline system build (track profile and associated components) in the specification tab before ordering to ensure like-for-like compatibility.
| Delivery | 7 Working Day Delivery |
|---|
How to Measure for a Recess Fitted Blind
Customer Product Reviews
Top customer reviews
-
Quick and efficient service.Quick and efficient service.0 people found this helpful
-
Very very good after salesVery very good after sales and the best curtain runners thankyou0 people found this helpful
-
very good servicevery good service - great price and quick delivery0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc