Fineline Gliders Pk10 Silver
Next Day Expected But Not Guaranteed. (Ex NI, SH, I)
UK Mainland Over £250
FREEFineline Gliders Pk10 Silver: Smooth-Running Curtain Track Gliders (Pack of 10)
Replacement gliders supplied in a pack of 10, intended to support consistent curtain movement along compatible Fineline track systems. Suitable for maintenance, refurbishment, and day-to-day spares where reliable running is required.
Smooth Running
Supports consistent curtain movement
Maintenance Ready
Ideal for repairs and refurb work
Pack of 10
Practical quantity for site spares
Silver Finish
Matches silver hardware schemes
Compatibility
Confirm track type before ordering
Site Spares
Useful for planned maintenance
Expectation setting: These gliders are intended for use with compatible Fineline track systems. If you are replacing an existing part, match the current glider type/profile before ordering. For specification-critical projects, confirm compatibility in the specifications tab.
Fineline gliders for dependable day-to-day curtain operation
Fineline Gliders Pk10 Silver are supplied as a practical spares pack for routine maintenance and replacement. They are used to support smooth movement of curtains along the track, helping reduce snagging and uneven running where gliders are worn or missing.
For contract environments, keeping the correct glider type on hand can reduce downtime and speed up room turns and refurb work. Full product details and any relevant technical documentation are available in the specifications tab.
Where this fits in our range
This item is a replacement glider pack for Fineline track systems. Choose it when you need like-for-like gliders for maintenance, spares stock, or refurbishment work. If you are unsure which glider suits your track, use the specifications tab to confirm the correct option.
- Facilities maintenance teams holding spares for quick replacement
- Refurbishment projects replacing worn or missing track gliders
- Installers matching existing Fineline track hardware
Who uses Fineline replacement gliders
Commonly purchased for ongoing upkeep in contract settings where curtains are frequently handled and hardware needs to remain serviceable. Typical use includes hospitality accommodation, healthcare privacy curtains, and education facilities where planned maintenance is routine.
For multi-room sites, spares packs help standardise maintenance and reduce delays. Compatibility and any available product documentation can be found in the specifications tab.
Best practice for replacements
Check an existing glider against the track profile before ordering to ensure correct fit and running. If the site has mixed track types, separate spares by system to avoid incorrect installation.
Technical specifications
| Product | Fineline Gliders |
| Pack Quantity | 10 |
| Finish / Colour | Silver |
| Compatibility | Confirm suitable Fineline track system in the specifications tab |
| Care & Maintenance | Refer to specifications tab for guidance and any available documentation |
For specification-critical work, use the specifications tab to access any available product details and supporting information.
| Delivery | Next Day Expected But Not Guaranteed. (Ex NI, SH, I) |
|---|
How long with my items take to be delivered?
How to Measure for a Recess Fitted Blind
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc