Flame Retardant Bedding | BS7175 Source 7 | Cream All Sizes and Sheets
Flame Retardant
Washable
Flame Retardant Bedding | BS7175 Source 7 | Cream All Sizes and Sheets
Flame Retardant
Washable
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEFlame Retardant Bedding to BS7175 Source 7 (Crib 7 Certified)
UK-manufactured flame retardant bedding certified to BS7175 Source 7. Designed for high-risk environments including care homes, secure accommodation and custodial settings where Crib 7 compliance is required.
BS7175 Source 7
Crib 7 certified bedding
Care Home Use
Suitable for regulated environments
Custodial Settings
Labelled to BS7175 Source 7
Healthcare Suitable
Used across UK healthcare settings
Washable
Maintains FR performance
UK Manufactured
Direct supply with stock held in the UK
BS7175 Source 7 flame retardant bedding for high-risk environments
This flame retardant bedding is certified to BS7175 Source 7 (Crib 7), making it suitable for environments where a higher ignition resistance is required. Each item is labelled accordingly and certification is available on request.
Manufactured in the United Kingdom, this range is designed for durability and repeated laundering while maintaining its flame retardant properties. Stock is held in the UK to support fast dispatch for contract requirements.
Duvet covers are supplied with an envelope end for secure closure and ease of use in institutional settings.
Where this fits in our range
This is our higher-risk Crib 7 bedding option for custodial and secure settings. For lower-risk environments, alternative ignition source ratings may be more appropriate.
Best suited for
Care homes, prisons, secure accommodation, healthcare facilities and other regulated environments requiring BS7175 Source 7 compliance.
Who uses our BS7175 Source 7 bedding
Commonly specified for care homes, custodial facilities, healthcare environments and other commercial premises where compliance with BS7175 Source 7 is mandated.
Also used in selected hospitality and accommodation settings where a higher ignition source standard is required by risk assessment.
Technical specifications
| Fire Standard | BS7175 Source 7 (Crib 7) |
| Duvet Cover Closure | Envelope end |
| Single Size (Approx.) | 137cm x 198cm |
| Double Size (Approx.) | 198cm x 198cm |
Certification to BS7175 Source 7 is available on request. Full washing instructions and documentation can be found in the specification tab. For compliance-critical projects, always confirm site requirements prior to installation.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Washing / Cleaning Information Face Fabric | 71 Degress C |
| Fabric Style | Plains |
| Composition | 100% Inherent Flame Retardant Polyester |
| Flame Retardant | Yes |
| Flame Retardant Certified Rating | BS7175 Source 7 |
How do I care for and clean flame retardant curtains?
Customer Product Reviews
Top customer reviews
-
Direct Fabrics were very helpful from…Direct Fabrics were very helpful from day one and were able to get me reasonable delivery costs to delivery to Northern Ireland. Bedding & curtains look amazing in my mothers Nursing Home bedroom.0 people found this helpful
-
I would thoroughly recommend Direct Fabrics.I ordered 2 sets of fire resistant duvets, pillow cases and fitted sheets for my elderly in laws, and am delighted with the quality of the bedding, the colours and the quick service I received. I would thoroughly recommend Direct Fabrics.0 people found this helpful
-
Great service and quality products happy customerGreat service and quality products happy customer0 people found this helpful
-
Product is okProduct is ok0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc