Flame Retardant Cotton Sateen Cream Curtain Lining 137cm Wide
Flame Retardant
Washable
Blackout
Sold Per Metre
Flame Retardant Cotton Sateen Cream Curtain Lining 137cm Wide
Flame Retardant
Washable
Blackout
Sold Per Metre
- Buy 50 for £9.15 each and save 10%
Next Day Expected But Not Guaranteed. (Ex NI, SH, I)
UK Mainland Over £250
FREEFlame Retardant Cotton Sateen Lining (Cream) – 137cm Wide Curtain Lining Fabric
A cotton sateen curtain lining fabric in cream, specified to add body, improve drape and help protect face fabrics in contract curtain and blind making. Supplied by the metre, 137cm wide, with a crease-resistant finish and a listed FR certified rating for contract use (see specifications).
Flame Retardant
Certified rating listed (see specs)
Cotton Sateen
Smooth lining finish in cream
Washable
Care guidance in specs tab
137cm Wide
Standard lining width
150gm Weight
Adds body without bulk
Crease Resistant
Helps maintain a clean finish
Expectation setting: This is a curtain lining fabric intended to sit behind your face fabric to improve drape and add protection. It is not marketed as a blackout lining on the product description text. If you need maximum light exclusion, select a dedicated blackout lining or blackout face fabric.
Why choose our flame retardant cotton sateen cream lining
This cotton sateen lining is specified to add body and a more structured hang to curtains and blinds, while offering a practical layer between the face fabric and the window. The product page lists a crease-resistant finish and a 150gm weight to support a tidy, professional result.
For contract and regulated environments, the product page lists a Flame Retardant Certified Rating: BS5867 Part 2B (see specifications tab). Washing instructions and certification documentation should be referenced from the spec tab for tender, O&M and compliance packs.
- Contract curtain and blind making where a cotton lining is preferred.
- Projects needing additional body, improved drape and a consistent lining appearance in a cream tone.
- Use behind a wide range of face fabrics where a smooth lining finish is required.
Where this fits in our range
Choose this option when you want a cotton sateen lining with a crease-resistant finish and a listed BS5867 Part 2B FR rating. If your priority is light blocking, move to a dedicated blackout lining. If your priority is added insulation and fullness, consider an interlining layer in addition to the lining.
Colour note
Listed as cream. As with all linings, perceived shade can vary with daylight, wall colour and the face fabric used.
Who uses our flame retardant cotton sateen lining
Used by curtain workrooms, fit-out teams and specifiers producing lined curtains and blinds for hospitality, education and healthcare settings where a flame retardant rating is required.
Also selected for contract refurbishments and ongoing maintenance programmes where a consistent lining specification supports repeatability across multiple rooms or sites.
Practical specification tip
Confirm lining choice against the room performance brief (light control, insulation, cleaning regime and compliance requirements). Refer to the spec tab for washing/cleaning instructions and certification details before ordering for tendered work.
Technical specifications
| Product | Flame Retardant Cotton Sateen Cream Curtain Lining |
| Composition | 100% Cotton |
| Fabric Width | 137cm |
| Weight | 150gm |
| Colour | Cream |
| Fabric Style | Plains |
| Flame Retardant Certified Rating | BS5867 Part 2B |
| Washing / Cleaning | Face Fabric 40 Degrees, Dry Clean P Sensitive, Iron Low Heat, Non Bleach |
| Pattern Repeat (Vertical) | n/a |
For contract and specification-critical work, always refer to the spec tab for the latest washing instructions and certification documentation, and validate suitability against site and end-user requirements before cutting or installation.
| Features | Flame Retardant, Screen Fabric |
|---|---|
| Delivery | Next Day Expected But Not Guaranteed. (Ex NI, SH, I) |
| Average Roll Size | 50 Metres |
| Flame Retardant Certified Rating | BS5867 Part 2B |
| Flame Retardant | Yes |
| Washing / Cleaning Information Face Fabric | 40 Degrees, Dry Clean P Sensitive, Iron Low Heat, Non Bleach |
| Fabric Style | Plains |
| Fabric Width (cm) | 137cm |
| Pattern Repeat Vertical (cm) | n/a |
| Composition | 100% Cotton |
Will my room be totally blackout with a blackout fabric?
What is the difference between blackout and dimout fabric?
How to Measure for a Recess Fitted Blind
Customer Product Reviews
Top customer reviews
-
Great fabric ThankyouGreat fabric Thankyou1 people found this helpful
-
Excellent serviceExcellent service. Firstclass communication. Will definately use. Again1 people found this helpful
-
Excellent service!Excellent service!1 people found this helpful
-
Excellent service, very pleased with qualityExcellent service, very pleased with quality0 people found this helpful
-
Excellent ServiceExcellent service from start to finish…thank you. Julie0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc