Honeycomb Pleated Blinds - Blackout | Energy Saving | Made to Measure
Blackout
Made To Measure
British Made
Thermal
Honeycomb Pleated Blinds - Blackout | Energy Saving | Made to Measure
Blackout
Made To Measure
British Made
Thermal
2 Weeks or Less - Manufactured to Order
UK Mainland Over £250
FREE
Honeycomb Blackout Pleated Blind: Made-to-Measure Light Control with Flexible Operation
Our best-selling honeycomb pleated blind, made to measure to suit your window. Designed to work well where you need a blackout pleated blind option, with mechanism choices to support different privacy and daylight control requirements.
Made to Measure
Sized to your window
Blackout Option
Works well for light control
Mechanism Choice
Select operation style
Top-Down
Privacy with daylight
Multi Zone
Static location setup
Discrete Look
Modern, tidy finish
Expectation setting: This is specified as a blackout pleated blind option. Final light reduction can vary depending on window construction, installation method, and any unavoidable light gaps at the edges.
Overview of our honeycomb pleated blind
This honeycomb pleated blind is a flexible, discreet system designed to give a clean, modern finish. It is made to measure and configured to your preferred mechanism and operation style.
The blind can be set up to suit how you want the window to work day-to-day, including top-down control and multi zone options for a static location.
Certificates, care details and any compliance documentation (where applicable) are available in the specification tab.
Where this fits in our range
Choose this honeycomb pleated blind when you want a discreet pleated system with a blackout pleated blind option and a choice of operation styles. It suits projects that need a neat finish with configurable privacy and light control.
Best suited for
- Bedrooms and guest rooms where blackout performance is required
- Spaces needing privacy without fully sacrificing daylight (top-down control)
- Projects needing a modern, discrete blind system with selected mechanisms
Who uses our honeycomb blackout pleated blind
Suitable where a discreet blackout pleated blind is preferred and the mechanism needs to match how the space is used day-to-day. The available operation styles support different privacy and light-control requirements.
Available operation styles (as offered)
- Top Down tensioned
- Top Down and Bottom Up tensioned (Multi Zone)
- Top Down cord operated (cord lock)
Select your mechanism and operation style on the product options to configure the blind for your installation.
Technical specifications
| Product Type | Honeycomb pleated blind (made to measure) |
| Blackout Performance | Works well as a blackout pleated blind (see expectation note above) |
| Mechanism Options | Top-down with cord lock; Multi zone in a static location |
| Operation Styles Offered | Top Down tensioned; Top Down & Bottom Up tensioned (Multi Zone); Top Down cord operated |
Washing guidance and any certification documentation (where applicable) are available in the specification tab.
Pleat Blind Mechanism Options
Top Down on a Cord operated
Maximum width is the fabric width. As it is not tensioned.
This system is a neat and tidy option that sits at the top of your window. The operation is from a cord operation and can be set to left or right.
Video of Plearted Blinds - NOT THIS FABRIC
| Composition | 100% Polyester |
|---|---|
| Features | Blackout, Thermal |
| Delivery | 2 Weeks or Less - Manufactured to Order |
| Operation | Hand, Cord |
| Flame Retardant | No |
| Fabric Style | Plains |
| Fabric Width (cm) | 2100mm |
What types of blinds do you offer?
Are all your blinds flame retardant?
Can I get blackout roller blinds for hotels?
Do you install blinds or is it DIY only?
What is the difference between blackout and dimout fabric?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc