Marquee Liner Exhibition Fabric Flame Retardant 150cm or 300cm wide
3 - 5 Working Days Delivery
This is our best selling marquee liner and exhibition fabric. It is a polyline fabric which is ideal for stages as simple decoration as well as for lining marquees and exhibitions stands and spaces. Its light weight weave means it has a super soft handle that be draped around areas easily.
The drape of this material is exceptional and works to give a decadent finish to any space.
Composition 100% flame retardant polyester.
Colours are available in either IFR or DFR depending on colour and width, this can be found in the drop-down options. Sold by the meter.
Width - 150cm or 300cm in selected colours
Suitable Application for the Marquee Exhibition Fabric
- Marquee and event tents
- Surround drapes and filler drapes.
- Light weight ceiling drapery
- Wall panelling and texture drapes
- Event walling
Benefits of the Marquee Exhibition Fabric
This fabric is incredible value and provides exceptional draping for an extremly low price. Very easy to work with to give an exceptional effect.
lovely fabric, came well wrapped and quickly. would buy again. Great price.
Great service. Highly recommend
Excellent company to deal with. Sales team were extremely helpful over the phone and email to ensure I received the correct fabric. Would highly recommend
I ordered fabric samples for a stage backdrop project that I was researching. Despite the current Covid restrictions which seems to be an all too common excuse for service delays the samples arrive promptly. I also received a follow-up call to check. Great service. Thanks.
Excellent services. Lizzie was lovely to deal with. I would definitely buy from direct fabric again.
Fast and efficient service. Staff were very helpful when I had the opportunity to speak with them.
|100% flame retardant polyester
|Flame Retardant, Voile
|Flame Retardant Certified Rating
|3 - 5 Working Days Delivery
|Pattern Repeat Vertical (cm)
|Fabric Width (cm)
|150 or 300
|Acoustic Absorption Rating
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
Type of Curtains
Where to Measure from - to desired length
Pencil Pleat Curtains
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track.
Pencil Pleat Curtains
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into.
Curtain Pole – Only
Top of the pole *we add on the upstand to our curtains,
Pinch Pleat Curtains
The underside of the track
Curtain Track Designer Pole
The glider underneath the track. The curtain will sit under the track.
See Heading Style of Choice above
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor.
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc