50mm Faux Wood Blinds - Wood Grain - White- White Ladder Tape
Flame Retardant
Made To Measure
50mm Faux Wood Blinds - Wood Grain - White- White Ladder Tape
Flame Retardant
Made To Measure
7-10 Working Days
UK Mainland Over £250
FREE50mm Faux Wood Blinds – Wood Grain White Embossed Snow with Ladder Tape (Made to Measure, BS5867)
A made to measure 50mm faux wood blind in Wood White Embossed Snow, supplied with ladder tape detailing. Manufactured in the UK from hard wearing PVC, this blind delivers structured light control and privacy, with certification to BS5867 for use in commercial environments.
Made to Measure
Manufactured to your exact size
Wide Slats
Structured, modern finish
BS5867 Certified
Suitable for contract use
Wipe Clean
Low maintenance PVC
Moisture Resistant
Suitable for bathrooms & kitchens
Ladder Tape Finish
Matching or contrasting options
Expectation setting: This is a slatted Venetian blind. It provides adjustable light control and privacy through tilting and raising/lowering, but it is not a blackout system and light will pass between slats when closed.
50mm Faux Wood Blinds in Wood White Embossed Snow
Manufactured in the UK, these 50mm faux wood blinds are made from 100% PVC with a wood-effect embossed finish. The Wood White Embossed Snow tone offers a clean, structured appearance suitable for both domestic and commercial interiors.
The free-hanging design allows precise light management. Slats can be tilted to control glare and privacy, or the blind can be fully raised to clear the window. Operation is via left hand cord tilt and right hand raise and lower (non-changeable configuration).
Certified to BS5867 for flame retardancy, this blind can be specified in care homes, hotels, schools, hostels and healthcare environments where compliance is required. Certification documentation is available within the specification tab.
Constructed from hard wearing PVC, the blind is wipe clean and suited to higher humidity areas such as bathrooms and kitchens. It is not recommended for use in consistently high temperature environments, including conservatories.
Where this fits in our range
This product sits within our contract-suitable faux wood Venetian collection. Choose this option when you require a structured 50mm slat appearance with ladder tape detailing and BS5867 certification. For softer window dressings or full blackout performance, consider our curtain or blackout blind ranges.
Best suited for
Suitable for domestic settings including home offices, bathrooms and kitchens where wipe-clean practicality is required.
Also appropriate for commercial environments such as care homes, hostels, schools, hospitals and hotels where flame retardant certification to BS5867 is specified.
Ladder tape detailing
Available with matching or contrasting ladder tape options to frame the 50mm slats and add definition to the window. This detailing can be used to coordinate with interior schemes or create visual contrast.
Technical specifications
| Product Type | Made to measure 50mm Faux Wood Venetian Blind |
| Material | 100% PVC (wood effect embossed finish) |
| Slat Size | 50mm |
| Operation | Free-hanging. Left hand cord tilt, right hand raise and lower (non-changeable) |
| Brackets | Box brackets with centre support. Snap-in top fix or box end brackets available. |
| Minimum Width | 290mm |
| Maximum Size | 2400mm width x 2400mm drop |
| Fire Retardant Standard | Certified to BS5867 |
| Care | Wipe clean with a damp cloth. Full certification documentation available in the specification tab. |
For compliance-led projects in hospitality, healthcare or education settings, confirm fixing methods, bracket positions and certification requirements at ordering stage. Flame retardant certificates and supporting documentation are available within the specification tab.
Further Information about our Faux Wood Venetian Blinds
In the pictures below are are our faux wood venetian blinds in a white colour.
Our Faux Woods are Perfect for Domestic or Contract
Faux Wood blinds are 100% PVC making them entirely waterproof and ideal for installations such as kitchens or bathrooms where the moisture content is high. PVC is also inherently fire retardant, meaning this product is suitable for commercial installations as well as domestic.
. The easy to install bracket system allows for fast and efficient fitting using either top fix or box end brackets. Please note this product is not recommended for use in hot conditions, particularly conservatories as the slats can warp under intense heat.
| Delivery | 7-10 Working Days |
|---|---|
| Operation | Cord |
| Features | Daylight (Shade) |
| Flame Retardant | Yes |
| Pattern Repeat Vertical (cm) | 0 |
| Fabric Width (cm) | 140 |
What types of blinds do you offer?
Are all your blinds flame retardant?
Do you install blinds or is it DIY only?
Customer Product Reviews
Top customer reviews
-
Excellent after sales service and GREAT product.After sales service is something customers often don't take into consideration when choosing a seller or a service provider. Not only was Direct Fabrics customer care great, the product as described, and delivery on time, the after sales service blew my mind. I will use them again and I cannot stop recommending them.0 people found this helpful
-
Great company quick delivery service and nice selection of productsGreat company quick delivery service and nice selection of products0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc