Mimas FR 45cm x 45cm Bespoke Complete Cushion 24 Colours - Pair
Flame Retardant
Mimas FR 45cm x 45cm Bespoke Complete Cushion 24 Colours - Pair
Flame Retardant
3 Weeks or Less
UK Mainland Over £250
FREE
DF Mimas Flame Retardant Cushion Pair (45cm x 45cm) in Mimas Dimout Curtain Fabric
A pair of complete cushions made in our DF Mimas curtain fabric, supplied with 45cm x 45cm cushion covers and fillers. The cushion fabric is flame retardant to BS5867.
Flame Retardant
Fabric stated as BS5867
Complete Cushions
Covers and fillers included
45cm x 45cm
Standard square cushion size
36 Colours
Matches DF Mimas curtain range
Dimout Fabric
Softens daylight (not blackout)
Project Friendly
Quantity discounts available
Expectation setting: DF Mimas is described as a dimout curtain fabric. On cushions, the fabric will soften light and provide decorative finish, but it is not blackout. Colour appearance can vary by batch and screen settings; for specification-critical work, request a sample before ordering.
Overview of DF Mimas cushion pair
These cushions are made using DF Mimas, a dimout curtain fabric offered in 36 colours, and supplied as a pair of complete cushions (45cm x 45cm covers with fillers). They are designed to coordinate with DF Mimas curtains and blinds for consistent room schemes.
The supplied product content states the cushion fabric is flame retardant to BS5867. For project and audit requirements, supporting documents and any care guidance are available in the Specifications tab where provided.
Where this fits in our range
This product is a ready-to-use accessory option for schemes using DF Mimas across curtains and blinds. Choose it when you want matching soft furnishings without specifying separate cushion covers and inners.
- Bedroom and lounge accessories in DF Mimas colourways
- Coordination with DF Mimas curtains and blinds
- Contract-led interiors where BS5867 fabric compliance is required (confirm project requirements)
Who uses DF Mimas flame retardant cushions
Suitable for coordinated interior schemes where cushions are specified alongside matching curtains or blinds. Commonly selected for bedrooms and lounge areas where a consistent fabric finish is required across soft furnishings.
For contract environments, confirm the project’s fire and furnishing requirements and retain relevant documentation from the Specifications tab.
Technical specifications
| Product | Pair of complete cushions (covers and fillers included) |
| Finished Size | 45cm x 45cm |
| Fabric | DF Mimas dimout curtain fabric |
| Colour Options | Available in 36 colours |
| Fabric Weight | 272gsm |
| Flame Retardancy | Stated as flame retardant to BS5867 |
For contract documentation, certificates and any available washing/care guidance are provided in the Specifications tab where applicable. If your project has strict maintenance or audit requirements, retain records with the order reference.
| Features | Flame Retardant |
|---|---|
| Delivery | 3 Weeks or Less |
| Flame Retardant | Yes |
| Fabric Style | Plains |
| Fabric Width (cm) | 140cm |
Are my products certified for use in a public place?
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
What does FR or flame retardant mean?
How to Measure for a Recess Fitted Blind
Do I get a certificate to show my products are flame retardant?
Customer Product Reviews
Top customer reviews
-
Direct Fabrics were very helpful from…Direct Fabrics were very helpful from day one and were able to get me reasonable delivery costs to delivery to Northern Ireland. Bedding & curtains look amazing in my mothers Nursing Home bedroom.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc