DF Mimas Flame Retardant Runners or Throws - 39 Colours
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREE
DF Mimas Flame Retardant Runners or Throws – 39 Colours
Made to coordinate with your made-to-measure curtains and other soft furnishings, DF Mimas bed runners and throwovers are manufactured in the same fabric to keep schemes consistent across rooms and corridors. Supplied unlined and hemmed, these are designed for contract environments where flame retardancy and straightforward maintenance are required.
Flame Retardant
M1, B1, EN 13773, BS 5867 Part 2 Type B & C, BS 7175, IMO FTP Code 2010 Part 7, NFPA 701 1+2, CA19, Classe Uno
39 Colours
Specified colour range for coordinated schemes.
Care Options
40°C short cycle wash (plus 71°C for thermal disinfection). Details in specs.
Unlined Finish
Not quilted or lined; supplied hemmed.
Same Both Sides
Fabric colour stated as the same on both sides.
Co-ordinates
Made to match your Direct Fabrics schemes.
Expectation setting: These runners and throwovers are supplied not quilted, not lined and are hemmed only. If you need padded or lined items for additional warmth or structure, this product will not provide that.
Overview of DF Mimas flame retardant bed runners and throws
DF Mimas runners and throwovers are produced to complement your made-to-measure curtains and other contract soft furnishings, helping you keep colours and finishes consistent across bedrooms and guest areas.
The fabric is described as the same colour on both sides, and items are supplied unlined and hemmed. This keeps specification straightforward for contract projects where coordinated presentation and documented flame retardancy are priority requirements.
Fire performance and care information, including the stated 71°C thermal disinfection wash option, is listed in the specifications tab for reference during ordering and site sign-off.
Where this fits in our range
Choose DF Mimas runners and throwovers when you need a coordinated accessory made in the same fabric as your wider scheme. This sits alongside our made-to-measure curtain ranges as an add-on for room-complete delivery.
Best suited for
- Hotels, serviced accommodation and hospitality bedrooms needing coordinated soft furnishings.
- Care and healthcare settings where documented FR standards and cleaning guidance are required.
- Education and residential schemes specifying consistent colourways across multiple rooms.
Who uses DF Mimas runners and throws
Selected for contract bedrooms and multi-room refurbishments where specifiers want a consistent, repeatable finish across a site. Common use cases include hospitality bedrooms, care environments, and education/residential accommodation.
These items are particularly useful when you have already selected a made-to-measure curtain and require a matching runner or throwover to complete the room scheme without changing fabric.
Sizes supplied
| Single Bed Runner | 145–150cm x 65cm |
| Single Bed Throwover | 145–150cm x 210cm |
| Double Bed Runner | 200cm x 65cm |
| Double Bed Throwover | 180cm x 210cm |
| King Bed Runner | 225cm x 65cm |
| King Bed Throwover | 245cm x 210cm |
Important: These products are not quilted and not lined.
Technical specifications
| Range Type | FR Decorative Dimout |
| Flame Retardant Standards | M1, B1, EN 13773, BS 5867 Part 2 Type B & C, BS 7175, IMO FTP Code 2010 Part 7, NFPA 701 1+2, CA19, Classe Uno |
| Colours | 39 colours |
| Weight | 255gsm |
| Composition | 100% Polyester |
| Care Instructions | 40°C short cycle wash, do not bleach, do not tumble dry & cool iron 110°C. Dry clean P sensitive. Additional care: washable at 71°C for thermal disinfection. |
Washing guidance and any available certification paperwork can be referenced in the specifications tab for site files and compliance checks.
| Features | Flame Retardant |
|---|---|
| Flame Retardant Certified Rating | BS7175 Source 7 |
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Flame Retardant | Yes |
| Fabric Style | Plains |
| Pattern Repeat Vertical (cm) | 1 |
| Fabric Width (cm) | 150 |
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
Customer Product Reviews
Top customer reviews
-
Direct Fabrics were very helpful from…Direct Fabrics were very helpful from day one and were able to get me reasonable delivery costs to delivery to Northern Ireland. Bedding & curtains look amazing in my mothers Nursing Home bedroom.0 people found this helpful
-
5-star serviceDirect Fabrics couldn’t have been more helpful from the start. Lovely fabrics, excellent finish. All round great experience.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc