Plain Champagne Voile Flame Retardant Fabric 300cm Wide
*covid-19 delivery delays Next Day Expected But Not Guaranteed. Delays Possible
Our plain flame retardant white voile is a simple elegant product that makes a statement whilst providing privacy in any room.
Available in 300cm width and in leaded or unleaded. The leaded option will have a pre-sewn run of weights along one of the longest lengths of fabric.
Why Choose Direct Fabrics Flame Retardant Champagne Voile
Our white voile has been chosen due to its elegance and its durability. It is an inherent flame retardant fabric so it can be washed upto 50 times and still be classed as flame retardant.
The product itself is durable and adds a clean finish to any window requiring a sheer or slight shading. The plain white flame retardant voile is certified to British Standards, European EN13773 aswell as IMO for Maritime use.
Who uses our Flame Retardant Champagne Voile
Our white fire resistant voile is used across the world and is found in hotels, care homes, schools, bed and breakfasts. Our most prestigious clients include the Hilton Group and also Sheraton groups.
Our product is loved by interior designers not only because of the soft feel, but also the price, it is perfectly suited for large contract projects that require a price sensitive product with a luxury finish.
Hotel Fire Resistant Champagne Voile - Sheer Fabric
Our hotel voile is supplied for privacy around hotels and is certifed to BS5867 which means that it can be washed
|FR Standards:||BS 5867 Part 2 B + C, IMO FTP Code 2010 Part 7, EN 13773|
|Dimensional Stability to Washing:||+/- 3%|
|Dimensional Stability to Dry Cleaning:||+/- 3%|
|Care Instructions:||40ºC short cycle wash, do not bleach, do not tumble dry & cool iron 110ºC. Dry clean P sensitive|
The very best fire resistant Champagne Voile Certified to BS5867 Part2C
Our Champagne voile has been used across the country and we pride ourselves on having huge stocks for quick delivery
Delivery is expected next working day, but is not 100% guaranteed.
|Average Roll Size||60 Metres|
|Washing / Cleaning Information Face Fabric||40 Degrees|
|Delivery||*covid-19 delivery delays Next Day Expected But Not Guaranteed. Delays Possible|
|Flame Retardant Certified Rating||BS5867 Part 2B|
|Fabric Width (cm)||300|
|Pattern Repeat Vertical (cm)||n/a|
Piece of paper
For recording your
Someone to assist if your
windows are large .
As this will allow you to get a
rigid full length measurement.
The first step is to decide whether you want your curtains to hang from, whether you go for a curtain track or a curtain pole, both of which should be positioned 15cm (6 inches) above the window and extend 15-20cm (6-8 inches) either side.
You want to measure the total width of the track or pole, excluding the finials as these will not be covered. Then add a small amount on to allow for an overlap of your curtains.
When you are ready to measure, you have to make a decision about where you want the curtains to finish. The choices are whether to go to the sill, below the sill or to the floor. We suggest that:
- Sill length curtains finish 1.25cm (1/2 inch) above the sill.
- Curtains that fall below the sill should finish 15cm (6 inches) below or just above the radiator to stop heat loss.
- Floor length curtains finish 1 - 1.5cm (1/2 inch) from the floor (although you can create a shappy sheak look by having them puddled on the floor, but that is personal preference).
It is essential that you double and triple check your measurements as if you have measured incorrectly your curtains will not fit properly and if they are made to measure / custom drapes they cannot be changed.
Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.
Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.
Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.