Matching Tiebacks Pair - Mimas Plain
Flame Retardant
Made To Measure
British Made
Matching Tiebacks Pair - Mimas Plain
Flame Retardant
Made To Measure
British Made
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREE
Plain Coloured Flame Retardant Fabric – Piped Tieback with Buckram (36 Colours)
A made-to-measure piped tieback manufactured in plain coloured flame retardant fabric. Available in 36 colours, each tieback is finished with buckram for structure and a defined shape, making it suitable for contract curtain installations.
Flame Retardant
Manufactured using FR fabric
Colour Options
Plain contract shades
Made to Measure
Produced to order
Piped Finish
Defined edge detailing
Buckram Reinforced
Structured shape retention
Contract Suitable
Designed for commercial interiors
Expectation setting: This product is a decorative curtain tieback manufactured in flame retardant fabric. It does not provide shading or blackout performance.
Plain FR tieback for coordinated curtain schemes
Manufactured using plain coloured flame retardant fabric, this piped tieback provides a clean, coordinated finish alongside contract curtains. With 36 colours available, it can be matched to curtain panels or used as a subtle contrast.
Each tieback is reinforced with buckram to maintain structure and presentation in daily use. The piped edge detail creates a defined outline, giving a tailored appearance suited to commercial interiors.
As a made-to-measure product, tiebacks are produced to order to align with project requirements. Full fabric details, fire certification and care guidance are available within the specification tab.
Where this fits in our range
Designed to complement our plain flame retardant curtain fabrics, this tieback offers a structured alternative to soft fabric-only options. Suitable where a more defined, piped finish is required.
Best suited for contract curtain installations
Suitable for hospitality, healthcare and education environments where flame retardant soft furnishings are specified as part of a wider curtain package.
Commonly used in hotels, guest accommodation, care settings, student residences and public buildings to hold curtains neatly during daylight hours while maintaining a coordinated finish.
Best suited for
Contract projects requiring plain FR tiebacks in multiple colourways, particularly where a piped and structured finish is specified.
Technical specifications
| Product Type | Made-to-measure piped tieback |
| Fabric | Plain coloured flame retardant fabric |
| Colours Available | 36 colour options |
| Construction | Piped edge with buckram reinforcement |
| Compliance & Care | Refer to specification tab for full fire certification and care guidance. |
For compliance-critical installations, always review certification and maintenance requirements in the specification tab prior to ordering.
| Features | Flame Retardant |
|---|---|
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Flame Retardant | Yes |
| Fabric Style | Plains |
Can I return made-to-measure curtains?
What does FR or flame retardant mean?
How to Measure for a Recess Fitted Blind
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc