Twinkle Champagne FR Voile Curtain Fabric
Flame Retardant
Washable
Sold Per Metre
Twinkle Champagne FR Voile Curtain Fabric
Flame Retardant
Washable
Sold Per Metre
- Buy 50 for £7.46 each and save 10%
Next Day Expected But Not Guaranteed. (Ex NI, SH, I)
UK Mainland Over £250
FREETwinkle Champagne FR Fabric: Wide Textured Voile for Light Window Coverings
A wide flame retardant voile in a champagne tone with a subtle textured “twinkle” effect. Designed for soft shading and a light finish where you want privacy without losing daylight.
Flame Retardant
FR fabric for contract use
Textured Effect
Subtle “twinkle” look
Wide Width
300cm for efficient drops
Lightweight
70gsm voile handle
Soft Shading
Light window covering
Champagne
Warm neutral colour
Expectation setting: This is a voile intended for soft shading and a light finish. It is not blackout and will not provide full night-time privacy.
Overview
Twinkle Champagne FR Fabric is a wide, durable flame retardant voile with a textured effect designed to keep rooms bright while adding gentle visual interest. It is suited to light window coverings where the aim is soft shading rather than heavy screening.
The 300cm width supports efficient making for contract installations, helping reduce joins on larger drops where appropriate to the design.
For specification-critical work, refer to the Specifications section and confirm any project documentation requirements. Washing instructions and any available certification paperwork are provided in the spec tab.
Where this fits in our range
Choose Twinkle Champagne when you need a wide FR voile with a subtle textured appearance for a softer, warmer look than a plain sheer. If the brief requires blackout or strong screening, this voile is not the correct option.
Best suited for
- Privacy sheers and light window treatments
- Projects needing wide-width voile for efficient fabrication
- Spaces where daylight retention is important
Who uses it
Suitable for contract environments where a lightweight voile is required for daylight privacy and soft shading, including hospitality settings and communal spaces.
Commonly specified where a warm neutral sheer is preferred and the textured effect helps avoid a flat, plain-voile appearance.
Project guidance
This fabric is designed as a light window covering. For rooms that require stronger privacy at night, pair with a suitable lining or a separate drapery layer depending on the specification. Washing instructions and any available certificates are provided in the spec tab.
Technical specifications
| Product type | Flame retardant voile (textured effect) |
| Colour | Champagne |
| Width | 300cm |
| Weight | 70gsm |
Washing instructions and any available certification documents are provided in the spec tab for reference and project files.
| Features | Flame Retardant, Voile |
|---|---|
| Average Roll Size | 60 Metres |
| Washing / Cleaning Information Face Fabric | 40 Degrees |
| Flame Retardant | Yes |
| Delivery | Next Day Expected But Not Guaranteed. (Ex NI, SH, I) |
| Fabric Style | Plains, Semi Plains |
| Fabric Width (cm) | Width 300cm |
| Pattern Repeat Vertical (cm) | Contact for details |
| Composition | Polyester |
What is a printed fabric base cloth?
Can I get fabric samples before ordering?
Customer Product Reviews
Top customer reviews
-
Excellent ServiceExcellent service Fabric arrived extremely quickly, well packaged and at a good price. What more could you ask0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc