Waterproof Crib 5 Mattress Single | Medical | Care | Hospitality
Flame Retardant
Washable
Anti Bacterial
Waterproof Crib 5 Mattress Single | Medical | Care | Hospitality
Flame Retardant
Washable
Anti Bacterial
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREEVMS110 Static Foam Mattress (Low Risk Pressure Care, BS7177:2008 Medium Hazard Crib 5)
A cost effective, low risk static mattress designed for commodity care settings. Four way turn design to help extend service life, with a wipe clean, multi stretch, vapour permeable cover that is cleanable up to 1,000ppm active chlorine.
Four way turn
Helps increase lifespan
Slab foam core
Simple, consistent support
Cleanable
Up to 1,000ppm active chlorine
Wipe clean cover
Vapour permeable and multi stretch
Fire performance
BS7177:2008 Medium Hazard
Max user weight
Guide only, clinical judgement required
Important: Risk categories and weight limits are provided as guidance only. An individual clinical assessment is strongly advised to confirm suitability for each user and care setting.
Simple low risk pressure care mattress, designed for everyday use
The VMS110 is a straightforward static foam mattress built around a slab foam core and a practical medical grade cover. It is intended for low risk pressure care environments that need a durable, easy to maintain mattress at a sensible cost.
The cover is multi stretch and vapour permeable to support comfort, and is designed to be easily wiped clean. It is cleanable up to 1,000ppm of active chlorine to support infection control routines.
Four way turn handling helps prolong service life by allowing the mattress to be rotated and flipped in multiple orientations. The cover uses an exposed zip style for easier removal when required.
Where it sits in the range
This is the entry level, low risk option within the static mattress lineup. If you need increased pressure redistribution performance, consider a castellated or higher risk mattress option.
Record keeping
Printed top and bottom surfaces provide quick access to product information, with an audit box available for records.
Best suited for
Commodity care and general care environments where a low risk static mattress is appropriate, and where wipe clean maintenance and durability matter.
Suitable for settings that require a BS7177:2008 Medium Hazard (Crib 5) fire performance rating, subject to site specification.
Cleaning guidance
The cover is designed for wipe down cleaning and can withstand cleaning solutions up to 1,000ppm active chlorine. Always follow local infection control protocols and product care instructions.
Technical specifications
| Product size | 1980mm x 880mm x 150mm (other sizes available subject to MOQ) |
| Risk category | Low risk (guidance only, individual clinical assessment strongly advised) |
| Cover construction | Sewn cover with exposed zip style for easier removal |
| Cover properties | Multi stretch, vapour permeable, wipe clean, cleanable to 1,000ppm active chlorine |
| Fire rating | BS7177:2008 Medium Hazard, Crib 5 |
| Max user weight | 160kg / 25st (guide only) |
| Foam specification | 33kg/m3 / 160N slab foam core |
| Warranty | 2 years reducing (contact us for full warranty terms) |
Compliance and documentation
If you require supporting documentation for audits and compliance paperwork, contact the team with your site requirements and order details.
| Composition | 33kg/m3 / 160N - Slab Foam |
|---|---|
| Features | Flame Retardant |
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Flame Retardant | Yes |
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc