Blossom Print Range Flame Retardant Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Blossom Print Range Flame Retardant Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREE
Printed Flame Retardant Curtains – Made to Measure (BS5867)
Contract-grade printed flame retardant curtains manufactured to your exact measurements. Designed for commercial environments requiring compliance with BS5867, with satin, panama and blackout base cloth options available.
Flame Retardant
BS5867 compliant
Made to Measure
Manufactured to your sizes
36 Design Options
Printed contract range
Washable
Temperature depends on base & lining
Expectation setting: Blackout performance is achieved when blackout base cloth or blackout lining is selected. Maximum washing temperature must not exceed the rating of the chosen lining.
About our printed flame retardant curtain range
This made to measure collection includes 36 printed designs produced on a flame retardant base cloth suitable for commercial interiors. The fabric meets BS5867 requirements (see specification table).
Three base cloth options are available: Satin (smooth, tightly woven finish), Panama (textured weave), and Blackout (for light control applications).
Satin base cloth can be washed at up to 71°C for thermal disinfection. Final washing temperature is governed by the selected lining: standard polyester lining 71°C, 3-pass blackout FR 40°C, and M1 FR lining 71°C.
Where this fits in our range
Suitable where a decorative printed curtain is required with compliant flame retardant performance. Base cloth selection allows the product to be tailored to clinical, hospitality or bedroom environments.
Best suited for
Care homes, healthcare facilities, hotels, education settings and other commercial projects requiring made to measure BS5867 curtains.
Design options within the range
Flair
Pattern repeat: H17.5cm x V34.5cm
Petal
Pattern repeat: H35cm x V35cm
Seedling
Pattern repeat: H7cm x V10.2cm
Countess
Pattern repeat: H7cm x V10.2cm
Desert
Pattern repeat: N/A
Waterfall
Pattern repeat: H8.75cm x V8.75cm
Technical specifications
| FR Standard | BS 5867 |
| Base Cloth Options | Satin, Panama, Blackout (all FR) |
| Satin Base – Max Wash | Up to 71°C (subject to lining) |
| Lining Options | Standard polyester (71°C), 3-pass blackout FR (40°C), M1 FR (71°C) |
Washing instructions and certification documents are available in the specification tab. For compliance-critical installations, confirm laundering procedures before placing order.
| Features | Flame Retardant, Blackout, Daylight (Shade) |
|---|---|
| Washing / Cleaning Information Face Fabric | 71 Degress C |
| Flame Retardant | Yes |
| Fabric Style | Florals, Patterns, Semi Plains, Stripes, Checks, Geometric |
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Fabric Width (cm) | 140 |
| Pattern Repeat Vertical (cm) | 64 |
| Composition | Polyester |
| Flame Retardant Certified Rating | BS5867 Part 2B |
Are my products certified for use in a public place?
What are my Curtain Lining Options?
What are the different curtain heading options?
How to Dress 3" Pencil Pleat Curtains
Which Size Curtain Eyelet do i need for my poles?
How much space will my curtains take up when stacking back
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
Can I return made-to-measure curtains?
What does FR or flame retardant mean?
Do I get a certificate to show my products are flame retardant?
What is Curtain Fullness & What Fullness will my Curtains be?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc