Free UK Mainland Delivery Over £250 Ex SH&I

Circus Pleated Blinds - Plain Solar Control Blackout

More Views

Excl. Tax: £ 41.66 Incl. Tax: £49.99
Excl. Tax: £ 41.66 Incl. Tax: £49.99

Choose your options below

* Required Fields

Excl. Tax: £41.66 Incl. Tax: £49.99
Estimated Delivery

2 Weeks or Less - Manufactured to Order

paypal sage visamastercardbacs cheque

UK Mainland £5.99
UK Mainland Over £250 FREE
Other Location Delivery Info

This is our best-selling pleated blind and works well as a blackout. It has the option of various mechanisms, top-down with a cord lock or multizone in a static location.

As a product the pleated blind is so flexible and discrete, it gives a modern finish to a room and works in a way that it be set how you want it. Simply select your mechanism and operation style and you can have any of the following systems Top Down Tensioned, Top Down and Bottom Up Tensioned (Multi Zone), Top Down cord operated.


Material

100% Polyester

Fabric Width

Roller: 2100mm

No Wipe Clean

No

Flame Retardant

Yes

Antibacterial

No

Machine Washable

No

Dimout (1-5, 5=Blackout Fabric)

2

Energy Saving (1-3, 1=Most Efficient)

2

Moisture Resistant Fabric

No

UV Block

100

Border Print

No

Colour

Cream & Neutrals

Design

Plains

Range

Pleated Blind & Cellular Blinds

Gallery of Tensioned Blinds - MULTI ZONE - FABRIC WAS INFUSION RANGE

The fabric used here is from our infusion asc shade range, it is shown as a gallery of our product range, not of this exact product sold.

Pleat Blind Mechanism Options

 

Top Down on a Cord operated

Maximum width is the fabric width. As it is not tensioned.

This system is a neat and tidy option that sits at the top of your window. The operation is from a cord operation and can be set to left or right.

 


Top Down Hand Operated - Tensioned

Maximum Width is 150cm – Bars will bow with tensioning

They have strings down both sides so are tensioned.

The blind works from the top bar and has a fixed bottom bar.

Fabric will only move from the top down.

 

Top Down Pleated Blinds

Top Down / Bottom Up Multi Zone Pleated - Tensioned

Maximum Width is 150cm – This is due to the bars flexing if wider.

They have strings down both sides so are tensioned.

The blinds have a fixed top bar and bottom bar, ,but also 2 other bars on the fabric.

The blind can be positioned anywhere on the window, top down, bottom up or in the middle

This system is simply amazing. Our Director has these in his house. They are totally flexible. For example you are in your bedroom and want privacy on your lower half, then simply put the blind from the bottom up and keep light coming into your bedroom, but have privacy below.

Pleated Blinds

Video of Plearted Blinds - NOT THIS FABRIC

Reviews

Only registered users can write reviews. Please, log in or register

Customer Reviews

Excellent in Everyway
By J Grimstead (Imported from Trustpilot)
28 June 2021 10:48:23 BST
Price
5/5
Quality
5/5
Value
5/5

Excellent in ever way. Ed and his team know their products, procure and deliver in a timely manner. The products, themselves, are also of the highest quality.

See allHide all

Additional Information

Composition100% Polyester
FeaturesBlackout
Flame Retardant Certified RatingNo
Delivery2 Weeks or Less - Manufactured to Order
OperationHand, Cord
Flame RetardantNo
Fabric StylePlains
Weight GuideNo
Pattern Repeat Vertical (cm)No
Fabric Width (cm)2100mm
Acoustic Absorption RatingN/A

How to Measure For Curtains, Blinds and Tracks.



Pen and Paper

For recording your
measurements.

Helper

Someone to assist if your
windows are large .

Metal Tape Measure

As this will allow you to get a
rigid full length measurement.





Make sure your curtain tracks and poles are fitted in the position you want.


Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide


We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.

 

Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement

Measure in 3 places and take the shortest drop – Floors and ceilings can run out.

Double / Triple check your measurements

how to measure for curtains



Choosing your Curtain Track Width

The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.

Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.

Wave curtains, for every 100cm of track the curtains will stack circa *18cm

Eyelet curtains, they will stack back circa 10cm per *70cm of track width

Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%

* all dependent on thickness of fabric



Selecting your Curtain Drop

Where to Measure From for Different Type of Curtains

Type of Curtains

Fitted On

Where to Measure from - to desired length

Pencil Pleat Curtains

Curtain Track

Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track.

Pencil Pleat Curtains

Curtain Pole

Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into.

Eyelet Curtains

Curtain Pole – Only

Top of the pole *we add on the upstand to our curtains,

Pinch Pleat Curtains

Curtain Track

The underside of the track

Wave Curtains

Curtain Track Designer Pole

The glider underneath the track. The curtain will sit under the track.

Acoustic Curtains

See Heading Style of Choice above

Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor.

 

How to Measure for Blinds going Inside the Recess

How to measure for blinds inside thet recess

  • Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the  smallest size.
  • Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
  • We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
  • Double check your measurements
  • Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm

How to Measure Outside of the Recess


  • Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
  • Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
  • Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
  • These sizes you have taken will be the size of the finished blind.

  • Double check your measurements
  • Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm



Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go

Draw your room on a piece of paper with a sky view

Now measure from the wall to wall for straight tracks,

L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.

Always check for obstructions and fitting issues you may need to work around


Quick Quote & Free Sample Requests

SAVE TIME - Send your project requirements, large or small. Sample Lists etc

*All required fields