Twinkle Champagne FR Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Twinkle Champagne FR Curtains
Flame Retardant
Made To Measure
British Made
5 Year Guarantee
Currently 3-4 Weeks - UK Manufactured
UK Mainland Over £250
FREETwinkle Champagne Flame Retardant Voile Curtains: Wide-Width Textured Privacy Sheer
Made-to-measure voile curtains using the EB Twinkle Champagne FR voile: a wide-width, lightweight sheer with a subtle textured “twinkle” effect. Designed for daytime privacy and soft shading while keeping rooms bright.
Flame Retardant
FR status listed in specifications
Made to Measure
Manufactured to your sizes
Wide Width
300cm voile listed
Textured Effect
Subtle “twinkle” finish
Lightweight
70gms weight listed
40°C Care
Cleaning info in specs
Expectation setting: This is a voile / sheer curtain for daytime privacy and soft screening. It is not dimout or blackout. The textured effect will read differently depending on lighting and how the voile is gathered.
Overview of Twinkle Champagne FR voile curtains
Twinkle Champagne FR is a wide-width voile with a subtle textured effect, specified where you want a light window covering that maintains daylight while improving daytime privacy. The fabric is listed as Flame Retardant and supplied as a voile / sheer.
The wide width (listed at 300cm) can be useful on larger glazing and taller drops, depending on your chosen make-up and project requirements. The listed weight is 70gms, keeping the finished look light and airy.
For contract documentation, cleaning guidance and any certification paperwork, please refer to the Specifications tab and product attachments.
Where this fits in our range
Choose Twinkle Champagne when you want a sheer voile with added surface interest rather than a completely plain sheer. If you require night-time light reduction, specify a dimout or blackout curtain instead of a voile layer.
Best suited for
- Daytime privacy sheers for bright interiors
- Layering behind main curtains for flexible light control
- Wide glazing where a 300cm voile can help reduce joins (make-up dependent)
Who uses Twinkle Champagne FR voile curtains
Specified where a flame retardant sheer is required for soft screening and daytime privacy, while keeping rooms bright. Suitable for contract-style installations where a voile layer is needed as part of a window treatment.
If your project requires specific evidence of compliance, confirm documentation requirements at tender stage and refer to the Specifications tab / product attachments for available paperwork.
Practical specification note
This product is a voile / sheer. If privacy at night or light exclusion is critical, pair with an appropriate lining or specify a dimout/blackout curtain solution. Cleaning information is listed as Face Fabric 40 Degrees in the specifications.
Technical specifications
| Product | Twinkle Champagne FR Curtains / EB Twinkle Champagne FR voile |
| Type | Voile / sheer |
| Features | Flame Retardant, Voile |
| Flame Retardant | Yes |
| Fabric width | 300cm |
| Weight | 70gms |
| Composition | Polyester |
| Fabric style | Plains, Semi Plains |
| Pattern repeat (vertical) | Contact for details |
| Washing / cleaning | Face Fabric 40 Degrees |
| Lead time | Currently 3-4 Weeks - UK Manufactured |
Certification documentation and washing guidance are available via the Specifications tab / product attachments. For specification-critical projects, confirm site laundering requirements before placing an order.
| Features | Flame Retardant, Voile |
|---|---|
| Washing / Cleaning Information Face Fabric | 40 Degrees |
| Flame Retardant | Yes |
| Delivery | Currently 3-4 Weeks - UK Manufactured |
| Fabric Style | Plains, Semi Plains |
| Fabric Width (cm) | 300 |
| Pattern Repeat Vertical (cm) | 1 |
| Composition | Polyester |
| Product Attachment |
Are my products certified for use in a public place?
What are my Curtain Lining Options?
What are the different curtain heading options?
Which Size Curtain Eyelet do i need for my poles?
How much space will my curtains take up when stacking back
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
Can I return made-to-measure curtains?
What does FR or flame retardant mean?
Do I get a certificate to show my products are flame retardant?
What is Curtain Fullness & What Fullness will my Curtains be?
How do I calculate how much curtain fabric I need?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc