Flame Retardant

Ore 3% Screen Shade Solar Control Battery Flame Retardant Electric Operated Roller Blinds

More Views

Excl. Tax: £ 83.32 Incl. Tax: £99.99
Excl. Tax: £ 83.32 Incl. Tax: £99.99

Choose your options below

  • Beige
  • Bronze
  • Charcoal
  • Dark Grey
  • Light Grey
  • White

* Required Fields

Excl. Tax: £83.32 Incl. Tax: £99.99
Estimated Delivery

3 - 5 Days Delivery

UK Mainland £5.99
UK Mainland Over £250 FREE

The Direct Fabrics ORE-Solar Control Flame Retardant

 fabric is designed for areas where a high level of solar control is required along with exceptional performance characteristics. Whilst reducing solar glare, the comfort of natural light is still maintained. With 6 colours along with one of the most advanced production procedures, the Flame Retardant fabric is designed with the commercial, educational and healthcare environments in mind.

 

  • Fabric Composition: 70% PVC, 30% Polyester
  • Fabric Range: 6
  • Louvre Widths: 127mm (5”) / 89mm (3.5”) / 63mm (2.5”)
  • Louvre Roll Length: 30m
  • Fabric Width: 2500mm (981/2”)
  • Fabric Length: 30m
  • Fabric Thickness: 0.50mm
  • Fabric Weight: 400 g/m2
  • Fire Retardancy: BS5867 Part 2, Type B
  • Shading: High Performance
  • Screen. Suitable for computer environments
  • Moisture Resistance: Suitable for moist conditions
  • Care Instructions: Wipe clean
  • Mesh/in: 48 x 48
  • Colour Fastness: 4.5
  • Chain operated roller blind

Life Time Warranty

Fabric Information Screen Fabrics

Ore Blind Fabric Information

Reviews

Only registered users can write reviews. Please, log in or register

Additional Information

Composition No
Flame Retardant Certified Rating BS5867 Part 2B
colour No
Fabric Style Plains
Operation No
Weight Guide No
Delivery 3 - 5 Days Delivery
Washing / Cleaning Information Face Fabric No
Flame Retardant Yes
Instructions and Brochure No





Tools Required to Check Measure for Curtains

Piece of paper

For recording your
measurements.




Helper

Someone to assist if your
windows are large .




Tape measure

As this will allow you to get a
rigid full length measurement.








Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.

Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.

We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.

Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.

Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")

These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.

 


how to measure for curtains