Cubicle Track Roller Gliders Runners for 6mm track - 3 styles
Quick overview:
Details
No FAQ found!
Spec
| Delivery | 7 Day Delivery |
|---|---|
| Washing Information | No |
| Flame Retardant | No |
| Instructions and Brochure | No |
| Colour | No |
| Price Band | No |
| Product attachment |
Tools Required to Check Measure for Curtains
Piece of paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Tape measure
As this will allow you to get a
rigid full length measurement.
Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take thesmallest size.
We will take one cm (half an inch) off the finished width size you have given us, to allow for the blind to pull up and down easily. The amount of fabric required will be more than this finished size, This is to allow for fabric hemming.
Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm (3" - 6") whatever you think looks appropriate.
Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 15-20cm (6" - 8")
These sizes you have taken will be the size of the finished blind. The amount of fabric required will be more than this finished size this is to allow for hemming.
