28mm Double Curtain Pole | Range 3 Colours 2 Finial Options | Contract Duty
28mm Double Curtain Pole | Range 3 Colours 2 Finial Options | Contract Duty
7 Working Day Delivery
UK Mainland Over £250
FREE28mm Heavy Duty Metal Double Curtain Pole Kit - Complete Set
A 28mm metal double curtain pole kit supplied as a complete set for a single installation. Designed for light to heavy weight curtains with a stated load guidance of up to 10kg (fixing dependent). Includes lined rings for smoother gliding and reduced metal-on-metal contact.
Simple Installation
Wall fix
Heavy Weight
Up to 10kg (fixing dependent)
Can be Cut Down
Cut with a hacksaw
Metal Double Pole
28mm pole set
Hand Operated
Ringed, hand-drawn use
Complete Kit
For 1 installation
Expectation setting: This is a double curtain pole kit (not a track). It is hand operated using rings. The stated maximum load is up to 10kg and is fixing dependent.
Why choose our 28mm double curtain pole kit
This 28mm double curtain pole kit is supplied as a complete set for a single installation and is suitable for light to heavy weight curtains. It is commonly used for project work where a robust, wall-fixed, ringed pole solution is required.
Poles can be cut down with a hacksaw to achieve the required finished size. For longer spans, poles over 200cm are supplied in two pieces with a joining splice, and a central support is required (included as stated).
Supplied lined rings are metal with a nylon insert to support smoother gliding and reduce metal-on-metal contact.
Fitting instructions and supporting documents are available in the spec tab.
Where this fits in our range
Choose this kit when you need a double pole configuration (front and back poles) supplied as a complete set with brackets, finials and lined rings. For glider-based operation, ceiling fixing, or continuous runs around corners, a curtain track is the more suitable option.
Best suited for
- Double pole installations where you want a front and back curtain position
- Ringed, hand-drawn curtains (with curtain hooks)
- On-site cut-down requirements using a hacksaw
What makes this kit different
A complete double pole set with supplied supports, finials and lined rings. Longer lengths use a joining splice arrangement and require a central support (included as stated). Stated load guidance is up to 10kg (fixing dependent).
Who uses our 28mm double curtain pole kits
Used by trade and installers for residential and general interior projects where a wall-fixed, ringed double curtain pole configuration is required.
For specification-critical installations, confirm wall substrate and fixing suitability prior to installation.
28mm double curtain pole rings
Rings are metal with a nylon insert for smoother gliding and reduced metal-on-metal contact. Rings include metal eyes to work with curtain hooks.
- Metal rings with metal eyes (for curtain hooks)
- Nylon inserts for smoother movement
- 36 rings supplied with 200cm kits; 48 rings supplied with 400cm kits
Technical specifications
| Product Type | 28mm heavy duty metal double curtain pole kit (complete set) | ||||||||||||
| Pole Diameter | 28mm | ||||||||||||
| Configuration | Double pole (front and back poles supplied) | ||||||||||||
| Operation | Hand operated using rings | ||||||||||||
| Fixing | Wall fixed | ||||||||||||
| Load Guidance | Up to 10kg (fixing dependent) | ||||||||||||
| Cut Down | Poles can be cut down with a hacksaw | ||||||||||||
| Joining (long lengths) | Joining splice supplied for connecting pole sections | ||||||||||||
| Length construction | Poles over 200cm supplied in two pieces (as stated) | ||||||||||||
| Bracket Type | IDC double curtain pole brackets | ||||||||||||
| Brackets / Supports | 3 supports supplied with both 200cm and 400cm kits | ||||||||||||
| Finials | 4 finials supplied per kit | ||||||||||||
| Rings | Metal rings with nylon insert; metal eyes for curtain hooks | ||||||||||||
| Kit contents by length |
Poles over 200cm are supplied in 2 pieces with a joining splice. A central support is required and is included as stated. |
Download fitting instructions via the link in the spec tab. Supporting documents are available in the spec tab.
Installation note
Fixing performance is dependent on the wall substrate and correct installation method. Always select suitable fixings for the installation surface.
| Delivery | 7 Working Day Delivery |
|---|
What are my Curtain Lining Options?
What are the different curtain heading options?
How to Install Curtain Rails & Blinds into Plaster Board
Which Size Curtain Eyelet do i need for my poles?
How much space will my curtains take up when stacking back
How to install Metal Curtain Poles
Can I return made-to-measure curtains?
How to Measure for a Recess Fitted Blind
What is Curtain Fullness & What Fullness will my Curtains be?
Customer Product Reviews
Top customer reviews
-
Good Service, good products and fast deliveryGood Service, good products and fast delivery0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc