Cubicle Track Roller Gliders Runners for 6mm track - 3 styles
3 - 5 Working Days Delivery
UK Mainland Over £250
FREECubicle Curtain Track Spare Gliders – 6mm Groove Replacement Runners
Replacement cubicle curtain track gliders designed for curtain tracks with a 6mm groove channel. These spare runners allow curtains to move smoothly along the track and provide a practical solution when replacing worn or damaged components.
6mm Groove Fit
Designed for cubicle curtain tracks with a 6mm channel.
Smooth Curtain Movement
Helps maintain consistent curtain movement along the track.
Replacement Runners
Useful for replacing worn or damaged gliders.
Simple Installation
Designed for quick fitting into compatible curtain track systems.
Cubicle curtain track spare gliders for 6mm groove systems
These cubicle curtain track spare gliders are designed as replacement runners for tracks that use a 6mm groove channel. They allow curtains to glide along the track while remaining securely attached to the carrier.
Maintaining properly functioning runners is important for cubicle curtain systems used in environments where curtains are frequently opened and closed. Replacing worn gliders can restore smooth curtain operation and prevent unnecessary strain on the track system.
They are compatible with the Direct Fabrics Cubicle Curtain Track and similar systems using the same groove size.
Where this fits in our range
These spare gliders are designed as replacement components for cubicle curtain track systems. They support the continued operation of installed tracks without replacing the entire track assembly.
Where cubicle curtain track gliders are commonly used
Cubicle curtain track gliders are used wherever curtain tracks form part of privacy screening systems. These replacement runners help maintain smooth curtain movement in environments where curtains are opened and closed frequently.
Typical applications include hospitals, care homes, treatment rooms, clinics, and other healthcare facilities. They are also used in commercial and institutional environments that use cubicle curtains for space separation or privacy screening.
Best suited for
Maintenance or replacement within existing cubicle curtain track installations where a 6mm groove runner is required.
Technical specifications
| Product Type | Cubicle Curtain Track Gliders / Runners |
| Track Compatibility | 6mm Groove Curtain Track |
| Typical Use | Replacement runners for cubicle curtain track systems |
| Compatibility Example | Direct Fabrics Cubicle Curtain Track |
Always confirm the track groove size before ordering replacement gliders to ensure compatibility with the installed curtain track system.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Flame Retardant | No |
How to install cubicle tracks on suspended ceilings?
How to Install Cubicle Curtain Tracks?
How to Install Curtain Rails & Blinds into Plaster Board
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
How to Measure for a Ceiling-Fixed Curtain Track?
How to Measure for a Wall-Fixed Curtain Track?
How to Measure for a Recess Fitted Blind
Customer Product Reviews
Top customer reviews
-
Good professional serviceGood professional service. Very friendly and the goods arrived as stated. Would certainly recommend0 people found this helpful
-
ExcellentExcellent, Delivery very prompt0 people found this helpful
-
I have used Direct Fabrics several…I have used Direct Fabrics several times and they have performed very well every time . Their communication about each order has been perfect and the quality of their work is second to none . They dispatch made to measure orders quite quickly and I certainly would recommend them . Thanks .0 people found this helpful
-
Very efficient serviceVery efficient service0 people found this helpful
-
Prompt deliveryPrompt delivery. Item as described.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc