Gallerie Flame Retardant Upholstery Fabric Crib 5 Waterproof - 5 Designs Multiple Colour Ways 140cm Wide
Flame Retardant
Heavy Weight
Sold Per Metre
Gallerie Flame Retardant Upholstery Fabric Crib 5 Waterproof - 5 Designs Multiple Colour Ways 140cm Wide
Flame Retardant
Heavy Weight
Sold Per Metre
- Buy 50 for £29.01 each and save 3%
3 Weeks or Less
UK Mainland Over £250
FREEWaterproof Upholstery Fabric Crib 5 BS5852 Certified
Printed Crib 5 upholstery fabric with a waterproof finish, designed for contract seating and fitted upholstery where compliance to BS5852 Crib 5 is required. Printed to order using the Gallerie watercolour-inspired designs.
Crib 5
BS5852 Crib 5 listed
Sold per metre
Order by the metre or request a sample
Design options
Gallerie print collection
Easy clean
Care guidance in specs
Antimicrobial
Specified for healthcare environments
Waterproof
Suitable for wipe-clean upholstery
Expectation setting: This is an upholstery base with a waterproof finish. It is not a blackout curtain fabric and is not intended for drapery. Printed colour and appearance can vary depending on lighting and the selected design scale.
Printed Crib 5 fabric for contract upholstery
This printed upholstery fabric combines a waterproof performance finish with BS5852 Crib 5 compliance for contract environments. Designs are printed to order from the Gallerie collection, featuring watercolour-effect artwork inspired by French impressionist styles.
The collection is presented in a range of contemporary colour directions including Salmon & Mint, Magenta & Lime, Aqua, Seafoam and Blueberry, selected to shift the mood of a scheme while remaining suitable for commercial interiors.
For project work, washing instructions and any available certificates can be accessed via the specification tab.
Where this fits in our range
Choose this option when you need a printed upholstery with a waterproof finish and Crib 5 compliance for contract seating. It is positioned for interiors that require a practical, cleanable surface combined with a decorative print rather than a plain performance vinyl or unprinted cloth.
Who uses this Crib 5 waterproof upholstery fabric
Specified for contract upholstery in settings where fire performance and wipe-clean practicality are required, including hospitality and leisure interiors. The antimicrobial and stain resistant finish makes it particularly relevant for healthcare use where stated project requirements call for these properties.
Best suited for
- Fixed and loose upholstery where BS5852 Crib 5 is required
- Areas needing a waterproof, practical surface finish
- Projects wanting a decorative print rather than a plain upholstery base
Technical specifications
| Fire performance | BS5852 Crib 5 |
| Finish | Waterproof upholstery finish |
| Additional properties | Stain resistant finish; antimicrobial properties stated |
| Ordering | Sold per linear metre; sampling available |
| Pattern repeats |
|
For tender and compliance documentation, washing/maintenance guidance and any available certificates are provided in the specification tab. Where projects have cleaning regime requirements, confirm suitability against site procedures before ordering.
| Features | Flame Retardant |
|---|---|
| Washing / Cleaning Information Face Fabric | 40 Degrees |
| Delivery | 3 Weeks or Less |
| Flame Retardant | Yes |
| Fabric Style | Florals, Patterns, Semi Plains, Stripes |
| Fabric Width (cm) | 140 |
| Pattern Repeat Vertical (cm) | 32 |
| Composition | 100% Polyester |
Are my products certified for use in a public place?
What is a printed fabric base cloth?
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
What does FR or flame retardant mean?
Can I get fabric samples before ordering?
How to Measure for a Recess Fitted Blind
Do I get a certificate to show my products are flame retardant?
How do I calculate how much curtain fabric I need?
Customer Product Reviews
Top customer reviews
-
Lovely fabric and unexpectedly speedy delivery. Many thanksLovely fabric and unexpectedly speedy delivery. Many thanks0 people found this helpful
-
Fantastic serviceFantastic service. Sample orders followed up with phonecalls. Only needed a small amount of fabric but no problem, fast delivery0 people found this helpful
-
KnowledgeableKnowledgeable, helpful and prompt, good price what more do you need?0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc