20pk Gliders for Hotel Curtain Track
3 - 5 Working Days Delivery
UK Mainland Over £250
FREEModel 56 Curtain Track Gliders (20 Pack) for Hotel Hand Drawn Curtain Track
A 20 pack of replacement gliders designed for our Hotel Hand Drawn Curtain Track. Supplied as a practical spare set for maintenance and day-to-day track servicing on contract installations.
Model 56 Compatible
Specified for use with Model 56 track systems.
Pack Quantity
Supplied as a 20 pack for spares or change-outs.
Maintenance Ready
Useful for planned maintenance and reactive repairs.
Hand Drawn Track Use
Matched to our hotel hand drawn curtain track range.
Replacement Part
For replacing worn or missing gliders on installed tracks.
Supports Made-to-Measure
Keeps made-to-measure track sets serviceable on site.
Expectation setting: This is a track accessory (gliders), not a curtain, fabric, or flame retardant component. It does not change the performance or compliance of the finished installation.
Track spares for efficient site maintenance
These gliders are supplied as a 20 pack for use with our Hotel Hand Drawn Curtain Track system and are compatible with Model 56. They are typically used to replace missing or worn gliders during servicing and room refresh cycles.
Keeping a spare pack on site helps reduce downtime and avoids delaying curtain rehanging after cleaning or maintenance work. This is particularly useful where a consistent track operation is required across multiple rooms or bays.
For the compatible track product, see: Hotel Hand Drawn Curtain Track .
Where this fits in our range
This is a practical spare part for maintaining our hotel curtain track systems. Use it alongside the track, brackets and end stops to keep installations serviceable without replacing the full track.
Best suited for
- Hotels and hospitality maintenance teams managing multi-room track servicing.
- Healthcare and care environments where curtains are removed and rehung routinely.
- Education and facilities teams needing quick turnaround for repairs.
Who uses these track gliders
Commonly ordered as spares by facilities managers, housekeeping teams and contractors responsible for maintaining hotel and contract curtain track installations.
Particularly relevant where curtains are taken down for laundering or periodic changeovers and gliders can be lost or become damaged during handling.
Compatibility reminder
These gliders are listed as compatible with Model 56. For specification-critical projects, confirm the track model and required glider type before ordering.
Technical specifications
| Product | Curtain track gliders |
| Pack size | 20 pack |
| Compatibility | Compatible with Model 56 (Hotel Hand Drawn Curtain Track) |
| Standards / certification | Not applicable (accessory component) |
If certificates, care guidance, or installation notes apply to the related track system, they are provided in the specification tab on the track product page where available.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Flame Retardant | No |
What are my Curtain Lining Options?
What are the different curtain heading options?
How to Install Curtain Rails & Blinds into Plaster Board
Which Size Curtain Eyelet do i need for my poles?
How much space will my curtains take up when stacking back
How do I place an order?
What payment methods do you accept?
What are your delivery times?
What is your returns policy?
Can I return made-to-measure curtains?
How to Measure for a Ceiling-Fixed Curtain Track?
What is Curtain Fullness & What Fullness will my Curtains be?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc