Bendable Bay Window Curtain Track - Wave Compatible, DIY, incl Bending Tool
5-7 Working Days
UK Mainland Over £250
FREE
Wave or standard track, for bay and straight windows
A slim 30mm x 20mm aluminium track that bends by hand to fit your bay, using the free curve former. On a straight window, fit it as it comes. Choose standard gliders for pencil pleat or pinch pleat curtains, or 60mm or 80mm wave gliders for a wave heading, without waiting weeks for a custom bent track.
Forgiving to bend
Bends by hand to a 150mm radius using the former. Gone slightly too far? Ease it back. Far more forgiving than Fineline.
Bay or straight windows
Leave it straight for a standard window or patio door. One track in every room gives one consistent look.
Standard or wave gliders
Standard gliders for pencil pleat, pinch pleat and other hook headings, or 60mm or 80mm wave gliders, pre-cut to the exact number for your track.
Modular and flat packed
Sections join for any bay size and ship as a standard parcel. No oversized delivery charges.
Smooth over the joins
A joiner and cover plate lock sections together. Fitted carefully, gliders run straight over the join.
Wall or ceiling fixing
Face fix to the wall above the window, or top fix to the ceiling through the pre-made holes in the track.
Everything you need to fit it
Track
Square30 aluminium track in your colour. Over 3m comes in two equal lengths with a joiner and cover plate.
Gliders
Standard gliders, or a string of 60mm or 80mm wave gliders cut to the exact number for your track.
Brackets
Wall brackets with covers, or ceiling fixing. Choose bay window when you order and we include 4 extra brackets for the bends.
End finials
A pair of end finials in your choice of style, to cover the trimmed ends.
Glider stops
Two curtain end stops to anchor the curtains at each end.
Instructions
Step-by-step fitting guide with diagrams, the same ones shown on this page.
| Track length | Track pieces | Standard gliders | Brackets, straight (bay +4) | Joiners |
|---|---|---|---|---|
| 1.5m | 1 x 1.5m | 22 | 2 | - |
| 1.8m | 1 x 1.8m | 26 | 4 | - |
| 2.4m | 1 x 2.4m | 34 | 5 | - |
| 3.0m | 1 x 3.0m | 42 | 6 | - |
| 3.6m | 2 x 1.8m | 50 | 7 | 1 |
| 4.8m | 2 x 2.4m | 68 | 9 | 1 |
| 6.0m | 2 x 3.0m | 84 | 11 | 1 |
Standard or wave? Explained in 60 seconds
Not sure which gliders you need? Here is everything in plain English, looking down on the track from above.
Gliders are linked by a cord so they stay evenly spaced. The curtain clips onto them and falls into soft, matching S-shaped folds, in front of and behind the track. No gathering, no messy pleats.
Standard gliders suit pencil pleat, pinch pleat and other hook headings: the curtain gathers into pleats in front of the track. Wave gliders are linked by a cord and give soft, even S-folds. 60mm gives more, tighter folds; 80mm gives fewer, deeper folds and needs a little more room off the wall.
The track is bent by hand to follow the shape of the bay. Two sections join on the straight centre run, and brackets go either side of every bend.
Jargon buster
Bay or straight, it is the same track
Bend it to fit
Join the sections, bend from the centre outwards with the former, trim the ends and fit. No measuring templates, no custom bent track, no waiting weeks.
Fit it as it comes
No bending needed. Trim to length, fix the brackets and clip it in. Same finish as your bay, standard or wave.
How it compares
| Feature | Our pickSquare30 bendable | Fineline track | Custom bent |
|---|---|---|---|
| Standard gliders (pencil, pinch pleat) | ✓ | ✓ | ✓ |
| Wave heading, 60mm or 80mm | ✓ | ✕ | ✓ |
| Bay and straight windows | ✓ | ✓ | ✕ |
| Forgiving, can be bent back | ✓ | ✕ | N/A |
| Bent by hand on site | ✓ | ✓ | N/A |
| Free curve former included | ✓ | ✕ | N/A |
| Ships flat, standard parcel | ✓ | ✓ | ✕ |
| Order online, no quote needed | ✓ | ✓ | ✕ |
| Replace a single section | ✓ | ✓ | ✕ |
| Curtain weight, single | 25kg | 10kg | 30kg |
| Curtain weight, pair | 50kg | 20kg | 60kg |
How much track do I need?
Measure along the line where the track will be fixed, section by section, and add them together. Add 10 to 15cm at each end for curtain overlap. The track is trimmed after bending, so always round up.
| Bay type | Typical total length | Suggested sections |
|---|---|---|
| Small Victorian 3-sided | 2.4 to 2.8m | 1.5m + 1.5m, trimmed to fit |
| Standard 3-sided bay | 3.0 to 3.6m | 1.8m + 1.8m |
| Large 3-sided bay | 3.6 to 4.8m | 2.4m + 2.4m, trimmed to fit |
| 5-sided or wide angled bay | 4.8 to 6.0m | 3.0m + 3.0m, trimmed to fit |
Standard, 60mm wave or 80mm wave
Classic gathered headings
For pencil pleat, pinch pleat and other hook headings. Works with standard wall brackets.
Closer, fuller folds
Wave gliders 60mm apart for a tighter, fuller wave. Works with standard wall brackets.
Deeper, bolder folds
Wave gliders 80mm apart for a deeper wave. Needs adjustable 75 to 110mm wall brackets so the curtains stack back correctly.
Which gliders for my curtains?
Your curtain heading decides your gliders. Check the tape on the back of your curtains, or tell us when you order made-to-measure.
| Curtain heading | Standard gliders | 60mm wave gliders | 80mm wave gliders |
|---|---|---|---|
| Pencil pleat | ✓ | ✕ | ✕ |
| Pinch pleat (double or triple) | ✓ | ✕ | ✕ |
| Goblet pleat | ✓ | ✕ | ✕ |
| Wave, made on 60mm wave tape | ✕ | ✓ | ✕ |
| Wave, made on 80mm wave tape | ✕ | ✕ | ✓ |
| Eyelet or tab top | Not for tracks. These hang on a curtain pole. | ||
Wave glider guide
Wave curtains are made to the number of gliders, not the track width. Each hook clips onto one glider. Your wave gliders are cut to the exact number for your track in our made-to-measure process, so this table is a guide. Choosing standard gliders? They are supplied to suit your track length.
| Total track length | 60mm wave | 80mm wave | ||
|---|---|---|---|---|
| Single | Pair | Single | Pair | |
| 1.5m | 26 | 14 each side | 20 | 10 each side |
| 1.8m | 30 | 16 each side | 24 | 12 each side |
| 2.4m | 40 | 20 each side | 30 | 16 each side |
| 3.0m | 50 | 26 each side | 38 | 20 each side |
| 3.6m | 60 | 30 each side | 46 | 24 each side |
| 4.0m | 68 | 34 each side | 50 | 26 each side |
| 4.8m | 80 | 40 each side | 60 | 30 each side |
| 6.0m | 100 | 50 each side | 76 | 38 each side |
Fit it in 7 steps
The order matters: join, bend, trim, then fit. Fitting a straight window? Skip steps 2 and 3.
Fit the joiner before bending
If your track comes in two sections, insert half of the joiner into one section and tighten it before you bend anything. Otherwise you will need to trim at the join.
- The join should sit on a straight part of the track
- Ideally in the centre of the middle window
Bend from the centre outwards
Work from the centre towards the ends, finishing each bend before starting the next. Hold the track against the curve former and bend until the kerfs touch, then stop.
- Always bend towards an open end
- Bending towards another bend stresses the track and can make gliders stick
Join, then trim the ends
Slide the bent halves together, butt the ends tightly and tighten the lock screws. Any difference in length now sits at the outer ends, so trim those to size with a fine-toothed hacksaw. Always trim after bending, never before.
Fix the brackets
- Two brackets at each end of the track
- One either side of every bend
- One on the join, or as close as possible
- Max 60cm apart on angled sections, 120cm on straight runs
- End brackets no more than 8cm from the end of the track
- 80mm wave on a wall: use adjustable 75 to 110mm brackets so the curtains stack back correctly
Fit the track
Wall: level your marks, fix the brackets (adjustable 75 to 110mm for 80mm wave) and clip the track in.
Ceiling: hold the track in place, mark through the pre-made holes and screw it up. Do not overtighten, as this can squeeze the track and make the gliders stick.
Add gliders, end stops and finials
Slide in your gliders (standard, or the pre-cut string of wave gliders), then the end stops, and fix them where the track ends. Finish with the finials and the cover plate over the join.
Optional glider brake: fit it with the lead glider and tighten it where you want the curtains to stack, for a neat stack at each end.
Hang your curtains
Clip each hook onto a glider. With wave curtains, open and close them a few times to set the wave evenly.
Tap any diagram to enlarge it.
Frequently asked questions
Can I use this track on a straight window?
How hard is it to bend?
How is this different from the Fineline track?
How many brackets do I need?
Can I use it with pencil pleat or pinch pleat curtains?
Can I hang my existing curtains on wave gliders?
Should I choose a 60mm or 80mm wave?
How many gliders will I get?
Why do I order wave curtains by hook count?
Can I cut the track to length?
What is the maximum curtain weight?
What colours are available?
What end finials can I choose?
Can I order a single replacement section?
Not sure which length or how many brackets?
Send us your bay measurements and we will tell you exactly what to order. Monday to Friday, 9am to 5pm.
Related products
| Composition | Aluminium with Plastic Bending Former Integral |
|---|---|
| Delivery | 5-7 Working Days |
| Flame Retardant | No |
| Weight Guide | Heavy 20-40kg |
| Product Attachment |
Customer Product Reviews
Top customer reviews
Reviews with images
Images in this review
-
Happy with the Bendable Curtain TrackDirect Fabrics Installed our curtain track onsite for us as we required a very particular curve going around our space. The track is amazing and we are thrilled with the finish0 people found this helpful
SAVE TIME - Send your project requirements, large or small. Sample Lists etc