Roller Runner Gliders for Track 64,74 - 10PK
3 - 5 Working Days Delivery
UK Mainland Over £250
FREERoller Runner Gliders (10 Pack) for Curtain Tracks
A 10 pack of roller runner gliders designed for smooth operation on compatible curtain tracks. Each glider is rated to hold up to 1kg per glider (as stated in the source content).
Roller Action
Helps reduce drag on track bends and longer runs
10 Pack
Convenient quantity for replacements and small installs
Load Rating
Holds up to 1kg per glider
Track Compatible
Designed for specified Direct Fabrics track types
Maintenance Friendly
Useful for on-site replacements and routine track servicing
Contract Practical
A small component that supports reliable operation over time
Expectation setting: These are gliders for curtain tracks (not fabric and not a complete track). Compatibility depends on the track model listed below. Load rating is stated as up to 1kg per glider.
Why choose these roller runner gliders
Roller runner gliders are specified where you want a smoother draw and consistent movement along the track. This pack is supplied as 10 gliders and is intended as a replacement or maintenance item for compatible Direct Fabrics curtain tracks.
Each glider is stated to hold up to 1kg per glider. This is helpful when planning the number of gliders required for the curtain weight and draw configuration.
Compatible track options are linked below for straightforward specification and ordering.
Where this fits in our range
This is a track accessory used to keep compatible curtain track systems running smoothly. Choose this when you need replacement gliders, spares for maintenance, or additional runners for a track setup.
Best suited for
- Replacing worn or missing gliders on compatible curtain tracks
- Maintenance spares for contract environments (e.g. hospitality, healthcare, education)
- Projects where smooth draw and dependable operation are required
Who uses roller runner gliders
Typically ordered by installers, facilities teams, and maintenance contractors to keep curtain tracks operating correctly across busy sites. Common in hospitality rooms, healthcare areas, education settings, and other commercial interiors where reliability and serviceability matter.
Compatible curtain tracks
Use these gliders with the following track options:
-
74 – Cord Operated Curtain TrackView product page
-
64 – Hand Operated Curtain TrackView product page
Technical specifications
| Pack size | 10 gliders |
| Load rating | Up to 1kg per glider (as stated) |
| Compatibility | 74 Cord Operated Curtain Track; 64 Hand Operated Curtain Track |
For site documentation, compatible track details and any supporting certificates are available in the specification tab where provided.
| Delivery | 3 - 5 Working Days Delivery |
|---|---|
| Flame Retardant | No |
How to Measure for a Ceiling-Fixed Curtain Track?
Customer Product Reviews
Top customer reviews
-
A great company to deal with excellent…A great company to deal with excellent products, fast delivery and superb customer service. Thank you .0 people found this helpful
-
Swift ServiceExtremely helpful when enquiry was made& very swift service.0 people found this helpful
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc