Spare Curtain Track Brackets for CT, CCT, ECT Models 4pk
7 Working Day Delivery
UK Mainland Over £250
FREE
Spare Mounting Brackets for Contract Curtain Track Systems
Replacement mounting brackets compatible with selected Direct Fabrics track ranges. Use for like-for-like replacements, additional fixing points, or maintenance stock on contract installations.
Range Compatible
For selected Direct Fabrics track ranges
Maintenance Ready
Ideal for repairs and replacements
Install Support
Add fixing points where required
Wall Options
Single and double wall brackets shown
Ceiling Option
Ceiling bracket shown
Spec Tab
Confirm selection in specifications
Expectation setting: These are spare mounting brackets (not a complete track kit). Compatibility depends on the track range. Please confirm the correct bracket option against the relevant track range and site fixing requirements.
Replacement brackets for Direct Fabrics track ranges
This product page covers spare bracket options that are compatible with the track ranges listed below. It’s intended for ongoing maintenance, refits, or where additional brackets are required to suit the installation environment.
For range-specific details and product context, use the links below to navigate to the relevant track system.
Compatible track ranges
- Contract Track – See link
- Contract Corded Track – See link
- Electric Contract Track – See link
Where this fits in our range
These brackets support our contract track systems as replacement or additional fixing components. If you need a complete operational track, select the relevant track kit or system page (linked above) and specify brackets as part of the installation plan.
- Like-for-like bracket replacement on existing tracks
- Adding fixing points during refit or refurbishment work
- Maintenance stock for multi-room or multi-site contracts
Mounting bracket options (images)
Images show common bracket types used across compatible track ranges. Confirm the correct option and projection needed for your installation.
Who uses these spare brackets
Typically ordered by facilities teams, contractors, and installers maintaining curtain track systems across hospitality, healthcare, education, and other multi-room environments where consistent fittings are required.
Also suitable for refurbishments where existing tracks remain in place and bracket replacement or repositioning is required to meet the new layout.
Contract installation note
Fixing requirements vary by substrate and loading. For specification-critical work, confirm bracket selection and fixing method to suit the site conditions and the relevant track system.
Technical specifications
Product options shown on this page are spare mounting brackets compatible with the track ranges linked above. Range-specific installation guidance and any supporting documents are referenced within the relevant product specification tabs.
Documentation: If certificates, drawings, or installation guidance are available for the selected range, they can be found in the product specification tab.
This page does not describe a complete track kit. It covers spare brackets only. Please use the track range links above for full system information.
| Delivery | 7 Working Day Delivery |
|---|
How to Install Curtain Rails & Blinds into Plaster Board
How to Measure for a Ceiling-Fixed Curtain Track?
How to Measure for a Wall-Fixed Curtain Track?
How to Measure for a Recess Fitted Blind
How do I calculate how much curtain fabric I need?
Customer Product Reviews
How to Measure For Curtains, Blinds and Tracks.
Pen and Paper
For recording your
measurements.
Helper
Someone to assist if your
windows are large .
Metal Tape Measure
As this will allow you to get a
rigid full length measurement.
Make sure your curtain tracks and poles are fitted in the position you want.
Choose the type of curtains that you would like and how you want to hang your curtains. See our heading styles guide
We recommend fitting your hardware first before measuring, this avoids any issues with not getting the perfect fit.
Measure your window using our main guide. Quick summary below. Remember wave, pinch, and designer headings require slightly different measurement
Measure in 3 places and take the shortest drop – Floors and ceilings can run out.
Double / Triple check your measurements
Choosing your Curtain Track Width
The width of the curtain track should extend past your window this allows for the curtains to stack back away from your window and allow light in.
Measure your recess and then add on 15cm on either side. For acoustics , we recommend further to fully cover the window and the surrounding area. In our test we added an additional 30cm to the width and also made the curtain floor length.
Wave curtains, for every 100cm of track the curtains will stack circa *18cm
Eyelet curtains, they will stack back circa 10cm per *70cm of track width
Pencil Pleat will stack approx 25% of the track width. eg. 210cm track will stack 52.5%
* all dependent on thickness of fabric
Selecting your Curtain Drop
Where to Measure From for Different Type of Curtains
|
Type of Curtains |
Fitted On |
Where to Measure from - to desired length |
|
Pencil Pleat Curtains |
Curtain Track |
Top of the Track - If using a extra wide track or designer track like silent gliss metropole, then measure from the underside of the track. |
|
Pencil Pleat Curtains |
Curtain Pole |
Measure from small ring at the bottom of eye under the ring, this is where your curtain clips into. |
|
Eyelet Curtains |
Curtain Pole – Only |
Top of the pole *we add on the upstand to our curtains, |
|
Pinch Pleat Curtains |
Curtain Track |
The underside of the track |
|
Wave Curtains |
Curtain Track Designer Pole |
The glider underneath the track. The curtain will sit under the track. |
|
Acoustic Curtains |
See Heading Style of Choice above |
Same but make sure wider than normal ideally 30cm past either side and 30 above. Also to the floor. |
How to Measure for Blinds going Inside the Recess
- Measure the exact width of the recess in three places; at the top of the recess, in the centre of the recess and near the bottom - then take the smallest size.
- Measure the exact drop of the recess in three places on the left hand side of the recess, in the centre of the recess and on the right hand side of the recess - then take the smallest size.
- We will take one cm off the finished width size you have given us, to allow for the blind to pull up and down easily.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the Fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
How to Measure Outside of the Recess
- Measure the recess in 3 places on the width and also 3 places on the drop. Take the widest measurement.
- Measure the width of the actual recess plus an additional amount – Usually from 7cm-15cm whatever you think looks appropriate. This is for overlap.
- Measure the exact drop of the recess. The blind would be fitted above the recess, so check the space above and add an amount on to the drop – usually from 7-15cm
- These sizes you have taken will be the size of the finished blind.
- Double check your measurements
- Cord Safety - Mounting Height - We ask for the mounting height of your blinds to allow for the cord to be 150cm off the ground. If mounting at 210cm This is what you enter in the fitting height box. We make a deduction to ensure the cord is 150cm from the floor. Thus the cord loop will be 60cm
Cubicle Tracks you have to measure with right angles from wall to wall where you want the track to go
Draw your room on a piece of paper with a sky view
Now measure from the wall to wall for straight tracks,
L Shape Tracks Measure to a point on the floor and mark with a piece of tape. Then for the other sides measure from the other wall to that point.
Always check for obstructions and fitting issues you may need to work around
SAVE TIME - Send your project requirements, large or small. Sample Lists etc